User's Manual

264 Key Maps
MX3X Reference Guide E-EQ-MX3XRG-H
Key codes are defined by COLxROWx=scancode. Scancode has a number of options, as
follows:
VK_code any valid Windows VK code (see below for valid codes)
'x' a single ASCII character ('A','b','1','@',' ', etc.)
SHIFT+VK_code for a shifted VK code (see below for valid codes)
SHIFT+'x' for a shifted ASCII character (should not be needed)
ACTION+code special function key (valid codes listed below)
CHANGE+mapname for modifier keys, change keymaps to mapname, as specified above
OPEN an unused key position, does nothing when pressed
Valid ACTION codes are as follows:
SCAN1 Scan key 1 (left side of screen on mobile device)
SCAN2 Scan key 2 (right side of screen on mobile device)
SCAN3 Handle trigger button (unused on mobile device, but specified)
POWER power button
BACKLIGHT backlight on/off function
Note that specifying the power button in a different location will affect suspend/resume functions.
The "15-second hold to force reboot" function is controlled by hardware, and will only work with
the default power button.