User's Manual

290 Technical Specifications
MX3X Reference Guide E-EQ-MX3XRG-H
Revision History
Revision G, November 2006
Notices Updated trademark statements.
Chapter 1 – Introduction
Updated “Overview” description. Added Wavelink Avalanche Enabler to
“Features/Options of the MX3X Family”. Updated “Related Manuals” section.
Updated RoHS Accessories.
Chapter 2 – Physical
Description and Layout
Added contents of Chapter 3 “Power Supply” to Chapter 2.
Chapter 3 – Power Supply Deleted. Contents added to Chapter 2.
Chapter 3 – System
Configuration
Renumbered from Chapter 4.
Updated “Wavelink Avalanche Enabler (Option)”. Added “Wavelink Avalanche
Enabler Configuration”. Changed “radio” to “wireless” or “client” in context, if
suitable. Updated default value for Display Backlight Idle Timer from 30 seconds to
3 seconds.
Chapter 4 – Scanner New.
Chapter 5 – MX3-RFID
Deleted. Refer to the “MX3-RFID User’s Guide” and the “MX3-RFID Reference
Guide”. Moved “Hat Encoding” and “Decimal-Hexadecimal Chart” sections to
Appendix B “Technical Specifications”.
Chapter 5 – Wireless
Network Configuration
Renumbered from Chapter 7 to Chapter 5.
Added “Sign-on Screen for LEAP, PEAP/MS-CHAP, PEAP/GTC”. Added
configuration instruction for PEAP/GTC on Summit devices. Updated parameters
and options based on Summit version 1.2.10 differences.
Chapter 6 – AppLock No change.
Appendix B – Technical
Specifications
Added “Hat Encoding” and “Decimal-Hexadecimal Chart” from the deleted Chapter
3 “MX3-RFID” chapter. Added “ASCII Control Codes” chart.
Entire Manual
Removed MX3-RFID specific information and instruction. Placed in “MX3-RFID
User’s Guide” and “MX3-RFID Reference Guide”; released for publication
September 2006. Changed “radio” to “wireless” or “client” in context, if suitable.
Changed Chapter cross-references to match Chapter number changes.
Revision F, August 2006
Notices
Added WEEE statement. Added trademarks for RAM mounting products and Summit
radio.
Chapter 1 – Introduction Added caution for battery well vent location “Battery Well Vent Aperture”.
Added key sequence to use if the touchscreen is not accepting taps or needs
recalibration to “Getting Started | Troubleshooting”.
Expanded instruction when using audio cable and headsets. Added voice accessories
to “Accessories”. Added ROHS marker to Accessories. Removed USB A and USB B
cable photos.
Changed MX3-RFID IP rating from “dust and water protection enclosure rating of
IEC 60529 compliant to IP55” to “...IP65”.
Added “Entering the Multi AppLock Activation Key”.
MX3P:
Added “Features/Options for the MX3X Family”. Added “RFID and MX3P Devices
and the MX3 Cradles”.
Replaced “RFID Device and LXE Cradles” and “The MX3-RFID Device and
Cradles” with “The Passive Vehicle Cradle”.