Computer Accessories User Manual

178 Summit Client Configuration
MX5X Reference Guide E-EQ-MX5CERG-F-ARC
LEAP w/o WPA Authentication
If the Cisco/CCX certified AP is configured for open authentication, set the Auth Type client
parameter to Open.
If the AP is configured for network EAP only, set the Auth Type client parameter to LEAP.
Start the Summit Utility by tapping the Summit Client icon.
Tap the Admin Login button on the Main panel. Enter the Admin password and tap OK. Tap the
Config or Profile tab.
or
Figure 5-13 Configure a Summit Profile for LEAP w/o WPA
Enter the SSID of the Access Point assigned to this profile.
Set Auth Type to Open.
Set EAP Type to LEAP.
Set Encryption to Auto WEP.
To use Stored Credentials, tap the Credentials button.
No entries are necessary for Sign-On Credentials as the user will be prompted for the User name
and Password when connecting to the network.
Figure 5-14 LEAP Credentials Dialog
Enter the Username or Domain \Username in the Credentials popup text entry box, if desired.