Computer Accessories User Manual

Setup the Client and Network 9
E-EQ-MX5CERG-F-ARC MX5X Reference Guide
Troubleshooting Start-up
Can’t align the screen, change the date/time or
adjust the volume.
AppLock is installed and running on the mobile device.
AppLock restricts user access to the control panels. See
Chapter 6 - AppLock for setup and processing information.
RFTerm® opens and runs upon each cold
reset and warm reset.
This activity is the default setting for RFTerm. Tap File |
Exit to close the RFTerm application.
Touch screen won’t accept stylus taps.
Touchscreen may have been disabled or the touchscreen
may require recalibration. Hold down the Power key and
the Orange key for 4+ seconds to warmboot the device.
Force the Start menu to appear by pressing the right arrow
key and the Blue key to access Start button options, then
use the arrow keys to select menu options (e.g. Start |
Settings ).
The MX5X seems to lockup as soon as it is
warm booted.
There may be small delays while the wireless client
connects to the network, Wavelink Avalanche management
of the MX5X startup completes, and AppLock launch
sequences finalize.
Setup the Client and Network
Prerequisites
• Network SSID or ESSID number of the Access Point
• WEP or LEAP Authentication Protocol Keys
See Chapter 5 - Wireless Network Configuration for complete information.
For Cisco and Symbol radios – See Appendix C – MX5X CE .NET 4.2, Wireless
Network Configuration