User's Manual



Bicycle Interface Module User Manual

Revision 1.5, May 9 2019

Introduction

The bicycle interface module is responsible for user access to an eBike. Authentication, state

and location is communicated to backend systems via a cellular connection. The unit also

displays the status of the bicycle and it’s available battery to the user.

Operation

The bicycle interface module is located on the rear fender and looks like this to the user:

The bike interface module features a battery level indicator, icons indicating if the bike is

locked or unlocked, and LED ring lights. A user is able to activate a bike by interacting with the

interface module in two ways. Either directly via NFC transit card or by scanning the applicable

QR code in the Lyft app.

PAGE 1
Bicycle Interface Module User Manual Revision 1.5, May 9 2019 Introduction The bicycle interface module is responsible for user access to an eBike. Authentication, state and location is communicated to backend systems via a cellular connection. The unit also displays the status of the bicycle and it’s available battery to the user.
PAGE 2
Accessory List No accessories are to be used with this device. Safety Precautions The module is not user serviceable. Do not open the bicycle interface module unless you are explicitly authorized to do so and trained on how to do so by Lyft personnel. Operating Conditions The device is intended for use between -20o C (-4o F) and 50o C (122o F) Electrical Supply: Parameter Typical Input Voltage 36V Operating Current 0.