Owner´s manual DP-1 Manual version 10-11-2007
Placement As a starting point, we suggest you initially position the DP-1’s 3 feet from the back wall and 4 feet from the side wall. Angling the speakers 10 degrees to the back wall will reflect the generated sound off your back and side walls, which will give you the acoustic impression of a much larger room. Also remember that a dipole speaker emits virtually no sound from the side. You can take advantage of this trait to cancel reflections from the side wall by varying the toe-in angle.
Connecting When connecting the DP-1s, always connect ”+” and ”-” from the amplifier to the corresponding ”+” and ”-” terminals on the DP-1 input. Connect your BassDirect speakers the same way to avoid phase errors. Spikes After the initial placement of the speaker, you might consider using the supplied metal point spikes to give them optimal support. To fix them on, we recommend that you gently lay the speaker on one side and screw in all four spikes together.
Technical Assistance For latest version of this document please check the Lyngdorf Audio website. If you have any problems with or questions regarding your Lyngdorf Audio product, please contact your nearest Lyngdorf Audio representative or: Lyngdorf Audio ApS Denmark E-mail: info@lyngdorf.com Web: http://www.lyngdorf.com www.lyngdorf.