- Lyngdorf DPA-1 Pre-Amplifier Owner's Manual

28
Main Out
The sub menus accessible in the ‘Main Out’ menu are:
Main Out
Main Out Control Main Out Level
Main Out Control
The Main Out Control sets the output level to be Full Scale (fi xed) or Regulated (variable).
Fixed means there’s a constant full scale output – most often used as ‘tape out’ or when using a
Lyngdorf Audio TDAI or SDAI as a second ‘slave’ amplifi er in a bi-amping set-up.
Regulated (variable) means that the output level will follow the level of the volume control. This setting
is chosen if you have, for instance, a power amplifi er or an active subwoofer connected.
If Full Scale is selected you will constantly have full output – with huge potential for
overload and damage of power amplifi er and/or loudspeakers if connected.
Main Out Level
This adjusts the overall output level in steps of - 0.1 db, it can be attenuated to – 40 dB in total.
Line Out
The sub menus accessible in the ‘Line Out’ menu are:
Line Out
Line Out Control Line Out Level
Line Out Control
The Line Out Control sets the output level to be Full Scale (fi xed) or Regulated (variable).
Fixed means there’s a constant full scale output – most often used as ‘tape out’ or when using a
Lyngdorf Audio TDAI or SDAI as a second ‘slave’ amplifi er in a bi-amping set-up.
Regulated (variable) means that the output level will follow the level of the volume control. This setting
is chosen if you have, for instance, a power amplifi er or an active subwoofer connected.
If Full Scale is selected you will constantly have full output – with huge potential for
overload and damage of power amplifi er and/or loudspeakers if connected.
Line Out Level
This adjusts the overall output level in steps of - 0.1 db, it can be attenuated to – 40 dB in total.