User's Manual

User Manual V5 CT23 Container Tag RFID-LSCAN
Page: 5 of 8
4 CT23 DEFAULT PARAMETER SETTINGS
Default values that will fit most applications are:
WSD = 1 inter-message random delay in Excitation or Motion modes
WUD = “xxxxx” 5 characters of user data
WBM = Y enables Beacon Mode
WIM = 120 sets minutes of the inter-beacon duration
WIS = 0 sets seconds of the inter-beacon duration
WBP = 3 sets number of messages in a beacon transmission
WCE = N sets automatic On/OFF control by exciter ID
WBD = 0 sets beacon time out in hours with 0 for no TO
WR1 = 1 inter-message random delay in Beacon mode
WEM = Y enables Excitation Mode
WEP = 20 sets number of messages in an excitation transmission
WEI = 30 sets beacon transmission interval in seconds for when the tag is sitting in the field
WEB = 0 sets number of messages in beacon transmission when sitting in the field
WMM = Y enables Motion Mode
WMP = 5 sets number of messages in the motion activated transmission
WMI = 30 sets beacon transmission interval in seconds for when the tag is continuously shaken
WMB = 3 sets number of messages in beacon transmission when continuously shaken
WME = 10 sets motion extension in seconds: duration of stay in Motion Mode after motion stops
WSE = Y motion sensor controlled Excitation Mode: when entering LF field transmit excitation
messages only when in motion (Y) or always (N)