User's Manual
Table Of Contents
- 95 Series RFID System User’s Guide
- Table of Contents
- List of Figures
- Preface
- Introduction
- Reader R95 Installation and Connections
- Exciter E95 Installation and Connections
- Power Supply TRM95 Installation and Connection
- Configuration and Operation
- Before You Begin
- General Procedure Rules
- Setting Up the Reader/PC Connection
- Reader’s Power-up Sequence
- Learning Procedure (Optional)
- Resetting the Reader
- Checking the Reader’s Basic Parameters
- Setting Up the Exciter’s Address
- LF Transmitter Output
- Configuring the Reader
- Setting Up the Carrier Threshold
- Setting Up the Exciter’s Test-Tag
- Setting Up the Real Time Clock
- Configuring the Reader’s Application Parameters
- Configuring the Reader’s Network Parameters
- Storing the Reader’s Configuration
- Reader - Final Setup
- 95 Series RFID System - Final Test
- Programming and Testing the Transponder T95
- Troubleshooting
- Specifications
- Transponder T95 Messages
- Excitation Modes
- Reader Software Upgrade Procedure
- Glossary
- Index
Reader R95
A-2 Specifications
Power
Consumption
Maximum 3 µA in sleep mode; 2.5mA in transmission mode.
Transponder
Lifetime
More than 5 years under normal use (1000 transmission/year).
Environmental
Operation
Temperature
- 20°C to +55°C.
Storage
Temperature
- 40°C to +70°C.
Relative
Humidity
Maximum 95%, non-condensing at +40°C
Mechanical • Dimensions, max
Length: 143.0 mm
Width: 107 mm
Height:max.2.8mm
• Weight: max 12 g
• Survives at least 1000 times through the automatic mail sorting machine.
Approvals Approved under I-ETS 300 220, I-ETS 300 330, RS-210 and FCC Part 15.
Reader R95
Configuration Superheterodyne receiver for 433.92 MHz signals modulated FSK.
Sensitivity Better than -105 dBm at 12 dB SINAD for 1 kHz modulation and 15 kHz total
deviation.
Successful
Message Ratio
(Throughput)
Better than 98% for any of the following conditions:
• RF Input Signal: -90 dBm to -10 dBm
• Frequency Range: 433.92 MHz ± 75 kHz.
• Total Frequency Deviation: 7 to 45 kHz.
• Data Rate: 19.2, or 38.4 kbps.
Object Sensor
Input
• Voltage limits: -0.5 to 5.5V
• Current: max 50µA
Relay Driving
Capabilities
• Max. Switching Current: 1A
• Max. Switched Voltage: 150Vdc or 300Vac
• Max. Switched Power: 30 W or 60 VA
• UL Rating: 1A @ 30Vdc
0.5A @ 120Vdc