User's Manual

Assembling Other Models of Exciters
3-6 Exciter EX21 Installation and Connections
5. Switch on the power supply.
6. Check the voltage on the terminal block TB8 (between pins 1-3).
7. Plug terminal block TB8 into connector TB7.
8. Re-check the voltage in Step 6.
9. Check whether the voltage between pins 1 of J2 and Ground is 5.0 ± 0.2 V.
10. Switch off the power supply.
Assembling Other Models of Exciters
Lyngsoe provides other models of Exciters with different antenna frame sizes for particular
installations. For mechanical assembling and electrical connections, use a similar procedure as
described in the previous paragraphs.