Lyngsoe Systems Exciter EX23G Exciter EX23G User’s Guide Revision C – July 21, 2006 950115B.
Lyngsoe Systems Exciter EX23G 1. General Exciter EX23G is designed to operate either as a stand alone exciter or as a unit in a multi-drop asynchronous network (RS485). When it’s connected to a network it shall be programmed with an unique address (NetId).
Lyngsoe Systems 2.1. Exciter EX23G EX23G Connections Power Connections WARNING Before you start the installation, check if the Power Supply provides the specified output voltage – 22Vac +/- 10% or 25.2-30.8Vdc, and min. 0.5A; any polarity can be used for the dc output. For the power connections use the 4.2mm Mini-Fit Jr receptacle (LS PN 350238) and the female crimp terminals for AWG18-24 (LS PN 350238). Strip the wire isolation 3.0-3.
Lyngsoe Systems 2.2. Exciter EX23G PC Software Configuration The simplest way to control EX23G is by using a Terminal Emulation program on the PC. The general configuration procedure consists of: . • Open a Terminal Emulation program on your computer (Procomm, HyperTerminal, etc). . • Configure the computer’s COM port to which the EX23G is connected.
Lyngsoe Systems Exciter EX23G ExcitationId frames. By using two loops to generate the field the resulting excitation field provides a more reliable excitation for tags (independent of their orientation) with a compact spatial presence compared with the previous exciter models. 3.3. UHF transmitter Exciter EX23G includes an UHF transmitter capable of transmitting its digital ID using messages on 433.92 MHz channel.
Lyngsoe Systems Exciter EX23G EVT R/W 1…100 10 EPS R/W S/P/A S Reserved for authorized personnel only Reserved for authorized personnel only Reserved for authorized personnel only ENF R/W 0, 1…7 5 EP1 R-EV1 1…127 n/a EA1 R-EV1 1…127 n/a EP2 R-EV2 1…127 n/a EA2 R-EV2 1…127 n/a 0-15 n/a EMN R EMS R/W Y/N N EMD R/W 1…9 5 ERD EGR ERS R/W R/W Y/N Y/N 0…255 R N N n/a Reserved for authorized personnel only Reserved for authorized personnel only Reserved for authorize
Lyngsoe Systems Exciter EX23G 5. FCC compliance Caution: According to FCC Part 15.21 “Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.” Part 15.105 Information to the user NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
