Installation Guide

RTLS Installation Guide
Page 2/12
1. INSTALLATION OF RTLS PORTALS
1.1. Before starting
Please observe the following:
• The RTLS portals must be installed and used in such a way to ensure
minimum 35 cm separation from users / bystanders.
• RTLS portal installation must be performed with directions from the
Installation and Test Tool or ITT, which is a web based application.
• Site survey data must be imported for ITT to function properly.
• WiFi network set up by the RTLS access points must be operational and
online.
• Make sure that a site overview drawing is available from the site survey to
help find installation locations.
• Power on the portal only when instructed so by ITT.
• All access points must be installed before installation of RTLS portals can
begin.
1.2. RTLS Installation Flow
The RTSL installation is performed using Installation and Test Tool, ITT.
Read about the Installation and Test Toll in the 077.208.10v RTLS Installation and Test Tool Guide.
The installation follows the flow in Figure 1.