Installation Guide

RTLS Installation Guide
Page 4/12
HARDWARE DESCRIPTION
A.1. Product numbers
The following products are included in this installation guide:
- LS4510 & LS4510 G2 (all versions): RTLS Portal
- LS4530 & LS4530 G2 (all versions): RTLS Portal
- LS4550 & LS4550 G2 (all versions): RTLS Portal
- LS9310: Lyngsoe WiFi access point
A.2. RTLS Portal versions
Figure 2. Portal features (G2 included too).
A.2.1. LS4510 & LS4510 G2 RTLS Portal
This is a passive-only portal that incorporates a passive reader and two antennas.
A.2.2. LS4530 & LS4530 G2 RTLS Portal
This is a portal that combines a passive reader with two antennas and an active low frequency exciter. This portal
will trigger active tags, but to successfully read the active tags it must be used in combination with LS4550 or
LS4550 G2.
A.2.3. LS4550 & LS4550 G2 RTLS Portal
This is a portal that combines a passive reader with two antennas, an active low frequency exciter and an active
UHF reader. This portal can read both active and passive tags. It can also read active tags that are excited by a
nearby LS4550 or LS4530 portal (or one of their G2 versions).
A.3. Identifying RTLS portal on packing label
Figure 3. Packing label with RTLS model.