User's Manual

Lyngsoe Systems Combi RFID Master MC30RG
Doc no. 950237 - Page 12 of 14
Disabling the motion sensor in the motherboard MBD40 (default , LF and UHF readers are ON all the time):
%1 EMS=N
%1 OK
%1 EMS=N
Enabling the motion sensor:
%1 EMS=Y
%1 OK
%1 EMS=Y
5.5.4. Passive tags reader (UHF EPCglobal Gen2
compatible) commands
The passive reader has two connections, one for power +24Vdc internal to the portal and one Ethernet connection to a
computer (internal or external to the portal). For more details referring the passive reader operation, please refer to the
user manual for the Impinj Speedway Revolution Reader. Part no for EU version of the reader is
IPJ-REV-R420-EU11M1 while for the North American version is IPJ-REV-R420-USA1M1.
The portal includes the capability to turn on and off tag scanning on the passive reader based on the internal motion
sensor. This feature helps minimize the potential interference between adjacent gates in a larger deployment and saves
power.
5.6. Other commands
For the complete list of commands and parameters accepted by the Portal, see the documentation for each module:
• the motherboard MBD40
• the LF Exciter EXB40
• the 434MHz reader RD23
• the Impinj Speedway Revolution reader - compatible with the EPCglobal or ISO18000-6 standards
• the GSM / GPRS modem