User's Manual

Lyngsoe Systems RFID Reader and Exciter PRX23
950409 Page 7 of 8
Where:
TS="0905191637Z" is the time the tag is received
LI=-62 indicates the RSSI level of the tag signal in dBm
UD="C\xFD\x00\x08\x02" is the user data of the tag
EX="\x7F" is the Exciter ID (when applicable)
CT="\x00" is the programmed CTRL byte
FG="HI" indicates the tag battery level. H means battery is OK. If the battery is low, this
field will show “Lx” where x depends on the tag type.
Type DAR=N and press Enter to stop dumping tag data. You should see:
OK
DAR=N
Type DAR=Y and press Enter to start dumping tag data. You should see:
OK
DAR=Y
If the user does not want to automatically dump the data, the commands used to
query the reader are described in the RFID System S23 Reference Guide document.