MAKE THE MOST OF YOUR ASADO Care & use/installation L30AG Built-In and L30AGF Freestanding Models
WARNINGS WARNING Read this manual carefully and completely before using your grill to reduce the risk of: 1. 2. 3. 4. Fire Burn hazard, personal injury or property damage Ruined steaks or other unpleasant cooking experiences Unapproved installation or servicing. This product is designed for outdoor use only. Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read this manual thoroughly before installation, use, or servicing of this product.
WARNINGS WARNING • Never use dented, rusty or damaged propane cylinders. Never store additional or empty propane cylinders in the grill cabinet or in the vicinity of this or any other appliance. Do not store propane cylinders indoors or on their sides. • Children should never be left alone or unattended in an area where a grill is located. Place your grill well away from areas where children play.
A message to our customers You’ve just joined the world of Lynx cooks … a discriminating collection of amateur and professional chefs that take outdoor cooking to a new level. Your grill has been designed and built with meticulous attention to detail and it offers some unique and powerful features. You can achieve maximum performance and enjoyment of these features only by carefully reading this manual ... before your first cook-out.
Pre-grill checklist BEFORE YOUR FIRST USE AT EACH NEW SEASON There are a few must-check safety precautions to consider before you use your grill. Please be sure that: At the start of each new grilling season you should remove the grilling racks and check the burners, venturis, orifices and valves for obstructions. • All packing materials and tie-downs have been removed from the burners. (See INDEX: “Unpacking and Assembly” for further details.) • You have fuel connected.
Table of contents A MESSAGE TO OUR CUSTOMERS 4 pre-grill checklist 5 Lighting your Grill 5 At Each New Season 5 checklist before each use (for your safety) 5 how to light your grill 5 table of contents 6 important safety precautions 7 basic grilling 8 cleaning YOUR LYNX GRILL 9 Stainless Steel 9 Drip Tray 9 troubleshooting your lynx grill Before You Call for Service potential problems Smell of Gas While Cooking 10 11 CONTACTING CUSTOMER CARE 12 THE LYNX STORY 12 lynx li
Important safety precautions Please review these important safety precautions before you use your grill. 1. NEVER LEAVE THE GRILL UNATTENDED WHILE COOKING. 2. Ensure all tie-down wires have been removed from the burners. 3. Always use caution when operating the grill in a windy area. (See INDEX: “Grilling in Windy Conditions” for further details.) 12. Never grill without the drip pan in place.
BASIC GRILLING PRE-HEATING FOOD SETTING Pre-heating your grill every time you use it is extremely important. Pre-heating allows the briquettes to properly heat up, providing more even and more consistent cooking results. Eggs 325°F—350°F (160°C—180°C) Bacon, Breakfast Sausage 425°F—450°F (220°C—230°C) Toasted Sandwiches 375°F—400°F (190°C— 200°C) Boneless Chicken Breasts 425°F—450°F (220°C—230°C) Boneless Pork Chops 1” (25.
CLEANING YOUR LYNX GRILL STAINLESS STEEL Lynx products are known for their attractive appearance. We achieve this by selecting only the finest grades of stainless steel and applying exacting workmanship. In order to maintain this attractive appearance over the life of the grill it is important to take the following steps: • After each use wipe down the exterior of the grill to remove grease and splatters. • Be sure to follow the cleaning instructions for keeping the cooking surface clean and ready for use.
troubleshooting your lynx grill before you call for service Please check a few things before calling for service: • Is there fuel supplied to the grill? • Is the main shut-off valve open? • Are you using the correct type of fuel? (LP or Natural Gas) (See INDEX: “Gas Requirements” for further details.
POTENTIAL PROBLEMS ...continued LOW OR INSUFFICIENT HEAT Ensure that you’ve preheated the desired burner(s) for at least 10—15 minutes Proper leveling during installation is critical. A grill that is out of level will cause erratic burner combustion and inefficient, uneven heating. A carpenter’s spirit level should be used to level the grill both-front-to-back, and side-to-side. If the low heat problem persists: • Check the gas supply line sizing requirements.
CONTACTING LYNX CUSTOMER CARE Before calling Lynx Customer Care, please make sure you have the following information: • Model number Your satisfaction is of the utmost importance to us.
Lynx limited warranty I. Limited Lifetime Warranty The stainless steel body, the ProSear™ 2 burners and rotisserie infrared burner are warranted to be free from defects in material and workmanship when subjected to normal domestic use and service for the lifetime of the original purchaser. This warranty excludes surface corrosion, scratches, and discoloration which may occur during normal use.
Lynx COMMON AREA LIMITED warranty The Lynx Limited Warranty covers residential installations only and is non-transferable to any other party. This ‘nonresidential’ warranty applies when the product is installed in common areas where more than a single party has rightful access to its use or in locations considered beyond normal residential use such as B&B’s, and private clubs.
WARNINGS WARNING 1. Always maintain the required clearances from combustible construction as detailed. The grill is designed for outdoor use only. Never use in a garage, building, shed, breezeway or other enclosed area. This grill shall not be used under any overhead combustible construction. 2. Gas grills are not design certified for and are not to be installed in or on recreational vehicles, portable trailers, boats or any other moving installation. 3.
BEFORE YOU START WARNING • Never install this product into a combustible enclosure without an insulated jacket. Doing so could result in fire, property damage and personal injury. • Never locate the grill under a roof or overhang, in a building, garage, shed or other such enclosed area. • Never locate the grill under combustible construction. • Installation must conform with local codes or, in the absence of local codes, with either the National Fuel Gas Code, ANSI Z223.
UNPACKING & ASSEMBLY The grill arrives nearly ready to use and requires only minor assembly. By carefully following the uncrating and unpacking steps, you will improve the customer’s first Lynx experience. Shipping weight on smaller units is app. 300 pounds and larger units may weigh over 500 pounds. WARNING: EXCESSIVE WEIGHT HAZARD! Use two or more people to move or install this unit. Failure to follow this instruction can result in back or other personal injuries.
built-in installations The Lynx Built-In Grill is designed for easy installation into masonry enclosures. A minimum of 6” of clearance is needed on the left side of the grill above the counter top for the motor and skewer. NOTE: Lynx built-in grills are intended either for installation in a built-in enclosure constructed of non-combustible materials or for an installation in a built in enclosure constructed of combustible material when installed with a Lynx insulating jacket (LIJ).
SPECIFICATIONS & installation The guides, measurements and dimensions detailed below are designated to assist you with planning your outdoor kitchen. NOTE: Due to continuing product innovation, specifications are subject to change without notice. IMPORTANT: Please reference the Care & Use / Installation manual for details on gas plumbing requirements, electrical specifications and the proper installation of your Lynx outdoor kitchen equipment. This manual can be downloaded from the Lynx website at www.
SPECIFICATIONS & installation OUTDOOR REFRIGERATORS Outdoor refrigerators MODEL A B C D 3” L24REF 24.25 33.00 26.00 32.00 L24BF a 24.25 34.50 26.00 34.25 24.25 34.50 c 26.00 34.25 34.00 26.00 33.50 L24DWR L15ICE b 15.25 CLEARANCE ICE MACHINE A 15” 25” B 34” d D 33 1/2” e min. A f max. C C 1/2” NPT gas connection B D Trash Chute (L18TS) 2”Ø or 2” square holes for manifold connection (rear or bottom access) A 12” min.
Gas connections WARNING NEVER CONNECT A GAS LINE DIRECTLY TO THE GRILL. A PRESSURE REGULATOR MUST BE INSTALLED ON ALL GAS EQUIPMENT. ALL LOCAL CODES REQUIRE IT AND LYNX SUPPLIES THE CORRECT REGULATOR WITH YOUR GRILL. REMOVING OR FAILING TO INSTALL THE PRESSURE REGULATOR CAN RESULT IN FIRE AND SERIOUS PERSONAL INJURY AND WILL VOID THE WARRANTY. The grill is factory set to use either propane (LP) or natural gas (NAT). It is critical that the gas you use matches that which the grill was set up for.
Gas connections ...continued For freestanding units using natural gas, Lynx strongly recommends using a quick disconnect kit. This Quick Disconnect kit, part #LQD, is available from your dealer. LP GAS Grills set up for LP gas come equipped with an LP hose/ regulator assembly for connection to a standard 20 lb. LP cylinder. (Type 1). All fittings necessary to attach the assembly to the grill are included.
Gas connections ...continued Insert the regulator inlet into the cylinder valve and turn the black coupler clockwise until the coupler is hand tight. Do not over-tighten this connection. To disconnect the coupler, first make sure the main cylinder valve is turned off. Grasp the coupler and turn counter clockwise. The inlet will then disengage. Always leak-test the connection after refilling or exchanging LP cylinders. (See INDEX: “Leak Test” for further details.
ELECTRICAL CONNECTIONS WARNING: ELECTRICAL GROUNDING • Product installation must meet local electric codes or, in the absence of local codes, the latest edition of the National Electrical Code ANSI/NFPA No. 70 or the Canadian Electrical Code CGA 1.6b2005. • Use only a Ground Fault Interrupter (GFI) protected circuit with this outdoor cooking gas appliance. • Do not use this outdoor cooking appliance if it has been submerged under water without thorough inspection by a qualified technician.
FINAL CHECKS LEAK TESTING DANGER! To prevent fire or explosion hazard, DO NOT smoke or allow any potential source of ignition (sparks, electrical arcing, etc) in the area while performing a leak test. Leak tests should be conducted outdoors only. Never conduct a leak test using fire or flame. NOTE: The ProSear™ 2 does not have an air shutter. • The appearance of the ProSear™ 2 burner should be visually checked. The ceramic tiles should be uniformly red to orange in appearance.
asado GRILL assembly EXPLODED VIEW 8 11 29 10 4 9 28 18 17 28 16 40 13 21 12 35 5 7 20 14 35 26 27 27 6 3 2 25 28 1 41 26 | Care & use/installation 30 15 33 35 22 23 19 24
exploded view description ITEM NO. PART NUMBER DESCRIPTION QTY.
CONTROL PANEL EXPLODED VIEW 12 12 7 6 13 12 16 8 9 7 13 12 7 30 6 13 16 8 9 7 13 30 29 29 2 31 2 16 31 16 14 30 14 30 1 1 24 16 10 2 1 10 3 14 24 CONTROL PANEL - EXPLODED FRONT VIEW 16 10 2 1 10 3 14 25 29 25 29 22 11 22 11 26 4 27 15 17 28 5 26 4 27 15 17 28 5 CONTROL PANEL - EXPLODED BACK VIEW 28 | Care & use/installation
CONTROL PANEL description ITEM NO. PART NUMBER DESCRIPTION QTY. 1 70252 FRONT PANEL WELDMENT 1 2 10001 BEZEL, KNOB 2 3 L11074 LYNX LOGO 1 4 31062 NUT, 1/8, SPEED, STEEL, SELF THREADING 2 5 34832 RELAY, SPST 30AMP 1 6 34837 VALVE, BI-METAL GAS 2 7 34870 FITTING, CONN, STRAIGHT, 3/8 TUBE 2 8 34864 FITTING, TEE, 3/8 TUBE 1 9 32836 FLEX TUBE, S/S, 3/8” X 9” 2 10 32554 LED HOUSING 2 11 34872 NUT, PUSH, ROUND, 5/16 SHAFT, SS 2 12 31335 ORIFICE, #42L, 1.
GRIDDLE PLATE EXPLODED VIEW 1 2 3 4 5 30 | ITEM NO. PART NUMBER 1 70255 GRIDDLE PLATE WELDMENT, 30” 1 2 34812 PLATE, HEAT TRANSFER, ASADO 2 3 34811 PLATE, HEAT COLLECTOR 2 4 14044 WASHER, 1/4, FLT, SS, 11/16 O.D. 16 5 20083 NUT, #10-24, HEX, SS, MACHINE 16 Care & use/installation DESCRIPTION QTY.
WIRING SCHEMATICS Asado GRILL Care & use/installation | 31
Lynx Professional Grills 7300 Flores Street Downey, CA 90242 Service: (888) Buy-Lynx (888-289-5969) Fax: (562) 299-6789 www.lynxgrills.
