Specification Sheet

LYNX PROFESSIONAL BROCHURE
|
36 37
|
LYNX PROFESSIONAL BROCHURE
FLAMETRAK GRILL
MODEL DESCRIPTION UMRP MSRP
LF36ATR 36” Built-In All-Trident Grill w/ Rotisserie and Flametrak $ 5,439 $ 5,979
LF36ATRF 36” Freestanding All-Trident Grill w/Rotisserie and Flametrak $ 6,579 $ 7,239
LIJ36 Insulated Jacket for 36”Built-In-Grill $ 679 $ 739
CC36 36” Carbon Fiber Vinyl Cover (Built-In) $ 169 $ 189
CC36F 36” Carbon Fiber Vinyl Cover (Freestanding) $ 229 $ 259
NOTE: Must specify gas type—NG for Natural Gas or LP for Propane
NOTE: For planning and installation details, including dimensions, specification sheets, and CAD drawings please visit the
Support/Product Documents section of the Lynx website: lynxgrills.com
36"
11"
9"
REAR
MANIFOLD
LOCATION
1
1
/
8
"
2
1
/2"
Built-In
PERFORMANCE FEATURES
• All Trident Platform (up to 83,000 BTUs)
• Heat Stabilizing Design
• 3/8” round stainless steel grates
• Dual position rotisserie cooking system: dedicated infrared
back burner, 3 speed motor, meat forks, spit rod
• Reliable spark ignition
• Removable large capacity smoker box
• 935 sq. in cooking surface (640 primary, 295 secondary)
CONVENIENCE FEATURES
• Lynx hood assist kit
• Fluid rotation handle
• Control Illumination with blue LEDs
• Dual halogen grill surface lights
• Temperature Gauge
Shown: LF36ATR
Ignition System FLAMETRAK Indicator Error
FLAMETRAK Indicator
Built-In
36” ISLAND PREPARATION
SAFETY FEATURES
• FLAMETRAK
™
safety system ensures gas
shut off in the case of flame loss.
Grill without
insulated jacket
Access Doors
9/16”
36 3/8”
3”
35”
22”
42”
24”
5”
4 1/2”
3”
11 5/8”
insulated jacket
10 7/8”
4” square holes for gas and electrical connections both left and right
sides(rear or bottom access). Make these holes in the frame based on your
requirements. 120V GFI outlet must be located within 6’ of the 4” hole.
If using a countertop with overhang a 9/16” notch is required.
FLAMETRAK GRILL
The FLAMETRAK
™
safety system uses a sensor that can tell if a burner’s flame is out. The sensor tries to relight
the burner, then shuts off the burner’s gas if there is no flame for 13 seconds. With a sensor on each burner, the
FLAMETRAK system helps provide grill safety whether a flame fails to ignite or a flame blows out.
NOTIFICATIONS
The FLAMETRAK system tells grill users when it has taken action. The FLAMETRAK indicator just above each burner
knob lets grill users check the flame’s status at a glance, rather than having to open the grill and look for a flame
beneath the grates.
THE SCIENCE BEHIND THE SAFETY
The FLAMETRAK system is based on flame rectification. Flame rectification is the effect where electrical current
changes from alternating current (AC) to direct current (DC) as it passes through a flame. If the current does not
change to DC, then the FLAMETRAK switch knows the flame is out—and it relights or shuts off the gas.
Flame rectification is proven technology that many water heaters and other devices use to confirm the presence of a
flame.
THE LYNX ALL TRIDENT GRILL
In 2018, the Lynx All Trident Grill is the first grill to feature the FLAMETRAK safety system. It sets the industry standard
in performance and safety. The FLAMETRAK safety system is patent pending.