WiFi Quick Start Guide

ManualsBrandsLynx Grills ManualsFreestanding GrillsLynx Grills 69000 BTU 42-1/2 Inch Wide Freestanding Two Burner Liquid Propane Grill

SmartGrill by Lynx

™

Quick Start Power Connectivity

& Wi-Fi Setup Process**

STEP

1—REQUIREMENTS

• Smart device (phone or tablet)

• 110 volt GFIC outlet at the grill

• Proper gas supply

• Home network name (SSID) & password

Name: ____________________________________________

Password: _________________________________________

• SmartGrill by Lynx

™

serial number/PIN*

Serial number: _____________________________________

PIN: _______________________________________________

*Located on the top of the CPU case.

STEP

2—SETUP YOUR SMARTGRILL

• If not already done, locate the 6 wire connections inside the grill

and attach them to the SmartGrill computer case. Each cable is

labeled to coincide with the port on the SmartGrill computer.

Please be sure to connect the cables as per labeling on cable

and computer.

• Locate the antenna in the white box inside the grill and screw

into the back of the SmartGrill computer case.

• Plug the power cable from the SmartGrill into a 110v GFIC

electrical outlet.

• Wait 20-60 seconds to hear SmartGrill say “SmartGrill is ready.”

STEP

3—DOWNLOAD AND SETUP THE SMARTGRILL APP ON

YOUR PHONE OR TABLET AND CREATE YOUR ACCOUNT

• Go to iTunes or Google Play and download “SmartGrill by Lynx” and install

• Open the SmartGrill App and click Create Account then enter your grill serial number and PIN

then click Continue.

• Enter your email address, password and your registration information and click

Create Account. You will get a conﬁrmation email.

• Open the conﬁrmation email and follow instructions to activate your account.

• Now login to the SmartGrill app by entering your email and password.

iPhone 5 or greater or

iPad version 2.0 or greater

Android 4.4 or greater

**For most current version of the Quick Start Guide, please refer to your app or our website at www.lyngrills.com. P/N 35407

Summary of content (3 pages)

PAGE 1
SmartGrill by Lynx™ Quick Start Power Connectivity & Wi-Fi Setup Process** STEP #1—REQUIREMENTS • Smart device (phone or tablet) • 110 volt GFIC outlet at the grill • Proper gas supply • Home network name (SSID) & password Name: _____________________________________________ Password: __________________________________________ • SmartGrill by Lynx™ serial number/PIN* Serial number: ______________________________________ PIN: _______________________________________________ *Located on the top of the CPU cas
PAGE 2
STEP #4—SETUP Wi-Fi CONNECTIVITY A. On your Phone or Tablet, verify that you have at least 60% wireless signal at your SmartGrill. 60% or better B. On your SmartGrill, press the power button and wait about 30 seconds for the SmartGrill to say “SmartGrill, at your service”. Resources C. On your phone or tablet, switch to your Wi-Fi settings and locate the wireless network called SmartGrill xxxx (xxxx is the last four digits of your serial number) and connect to it. The password is lynxgrill. E.
PAGE 3
SmartGrill by Lynx™ Quick Start Retail Demo Mode Retail Demo Mode is a discreet mode whereby the SmartGrill by Lynx™ operates without burners. This mode is designed to work within the retail showroom environment. STEP #1—REQUIREMENTS • SmartGrill by Lynx™ • 110 volt GFIC outlet at the grill STEP #2—SETTING THE GRILL TO RETAIL DEMO MODE • Locate the antenna in the white box inside the grill and screw into the back of the SmartGrill computer case.