WiFi Quick Start Guide

ManualsBrandsLynx Grills ManualsFreestanding GrillsLynx Grills 69000 BTU 42-1/2 Inch Wide Freestanding Two Burner Liquid Propane Grill

STEP

4—SETUP Wi-Fi CONNECTIVITY

B. On your SmartGrill, press the power button and wait about 30

seconds for the SmartGrill to say “SmartGrill, at your service”.

STEP

6—START USING YOUR GRILL

• Turn your lights on by saying, “SmartGrill Lights”. To turn the lights off, say “SmartGrill, Lights” and the lights will now turn off.

• To try out a recipe, go back to your SmartGrill App and go to the Recipe icon.

• Select a recipe from the recipe list and click Cook Now to send the recipe to your SmartGrill. Follow the voice commands (how many

burners, place food on grill, turn food over, remove food from grill). Please note that it could take several minutes for your SmartGrill

to warm up and give you the command to place food on grill.

STEP

5—CALIBRATING YOUR SMARTGRILL

Before your ﬁrst grilling session, use your SmartGrill app or voice command to calibrate your SmartGrill by Lynx™. This will set a

minimum ﬂame level which is affected by ambient temperature, altitude, wind conditions and more. Calibration is required for

optimum performance of your SmartGrill. The calibration process will take 15-20 minutes.

To perform a calibration, please close the hood of the grill, then:

• By Voice Command: “SmartGrill, begin calibration.”

• By App:

Go to Resources

Select My SmartGrill

Select Calibrate Grill

Select Automatic Calibration

You will receive a “Calibration failed” if the SmartGrill did not complete the cycle. SmartGrill will automatically shutdown when

calibration is complete.

Need more help? Please refer to your detailed instruction manual or call our customer support team at 888-289-5969 and choose the

SmartGrill option #5.

A. On your Phone or Tablet, verify

that you have at least 60% wireless

signal at your SmartGrill.

60% or better

C. On your phone or tablet, switch to your Wi-Fi settings and

locate the wireless network called SmartGrill xxxx (xxxx is the

last four digits of your serial number) and connect to it. The

password is lynxgrill.

D. Now go back to your SmartGrill App and

go to the Resources icon, then

My Smart Grill

SmartGrill Wi-Fi Setup

Wait 10-20 seconds for the wi-ﬁ setup menu.

Resources

E. Click on the SSID and enter the password for your home

network (information in STEP #1—REQUIREMENTS) then

select DONE. After 20-60 seconds, your SmartGrill will say

“SmartGrill is connected to the internet”, and your wireless

conﬁguration is complete. Now just power the SmartGrill off,

then back on. SmartGrill will say “SmartGrill connected to

the internet” followed by “SmartGrill at your service.” On the

SmartGrill app click on the Grill icon and now your SmartGrill

is connected and ready to grill.