Manual

18
|
CARE & USE/INSTALLATION
Installation requires an outdoor 120VAC 15A GFI (Ground
Fault Interrupter) electrical outlet adjacent to the SmartGrill
by Lynx™.
The GFI outlet features an internal break that reduces
shock hazard. This type of outlet should be installed by a
qualified electrician either inside the island enclosure for
built-in units, or near the location where a free standing unit
will be used.
If the electrical system fails to operate, a connection may
have come loose in shipping or the GFI may have tripped
requiring a re-set. See the Troubleshooting section for
more details.
A side burner or power burner can be connected to your
SmartGrill with the wiring connection in the back of each
unit. Ask your dealer or call Lynx at 888-289-5969 for more
information.
CONNECTION TO AC POWER
ELECTRICAL CONNECTIONS
Product installation must meet local electrical codes, or in the absence of local codes, the latest edition of the
National Electrical Code ANSI/NFPA No. 70 or the Canadian Electrical Code CSA C22.1.
Use only a Ground Fault Interrupter (GFI) protected circuit with this outdoor cooking gas appliance.
Do not use this outdoor cooking appliance if it has been submerged underwater without a thorough inspection by
a qualified technician.
This grill is equipped with a three-prong (grounded) electric plug for your protection against shock hazard and
must be plugged directly into a properly grounded three-prong outlet. Never cut or remove the grounding prong
from this plug.
Use only extension cords with a three-prong grounding plug, rated for the power of the equipment and approved
for outdoor use with a “W-A” marking.
To protect against electric shock, do not immerse any part of the power cord, an extension cord, or any plugs in
water or other liquid.
Unplug the product before thorough cleaning. Allow it to cool before putting on or taking off parts.
Do not let the cord hang over the edge of a table or touch hot surfaces.
Do not use an outdoor cooking gas appliance for purposes other than intended.
Do not operate any outdoor cooking gas appliance with a damaged cord, plug, or after the appliance
malfunctions or has been damaged in any manner. Contact Lynx for repair.
WARNING: ELECTRICAL GROUNDING