Manual

CARE & USE/INSTALLATION
|
23
SmartGrill will automatically shutdown when calibration is
complete. It will say "Calibration complete" or send you the
same message on your app. If the calibration fails, SmartGrill
will say "Calibration failed" or send you the same message on
your app.
AT EACH NEW SEASON
At the start of each new grilling season you should remove
the grilling racks and check the burners, venturis, orifices,
and valves for obstructions.
Spiders and insects often nest in these areas of the grill
and can disrupt airflow, causing damage to the grill and
personal injury.
Also, check all hoses, wires, and fitting for damage,
abrasion, wear and tear.
CHECKLIST BEFORE EACH USE (FOR YOUR SAFETY)
• Do you smell gas? If yes, shut everything off and call the
gas company or a qualified plumber to check for leaks. If
not, please continue.
• Is your cooking area free and clear of any combustibles
besides your food that might ignite? If not, please clear the
area before starting the lighting process. If yes, please
continue.
• If you are using a portable propane cylinder, is it connected
and leak tested? If not, check the connection before
continuing. If yes, please continue.
• Are all burners properly seated in the grill with the venturi
of the burner over the orifice and the center crossbar
in the bracket? If not, seat the burners properly before
continuing. If yes, please continue.
• Is the wind blowing just lightly and not blowing on the
back of the grill? If not, wait until the wind subsides or turn
your free standing grill so the wind goes into the front of
the grill. If yes, please continue with the lighting process.
HOW TO LIGHT YOUR GRILL
• Before each use, complete the checklist above
• Remove the grill cover.
• Make sure all burners are in the OFF position.
• Press the ON/OFF button. The blue LED lights that
surround the knobs will indicate that the grill is energized.
After 5-20 seconds SmartGrill will say “SmartGrill at your
service.”
• Select which mode of operation you would like to use
from below;
• Manual Cook: Turn the knob that corresponds to the
burner you wish to light by turning the knob clockwise 2
full revolutions. SmartGrill will say, "SmartGrill in manual
cook mode."
• Timed Cook: Select an amount of time to cook, and a
temperature.
• To select an amount of time to cook, use the voice
command: “SmartGrill, Use <N> burner” where N is
1, 2, or 3 – the number of the burner you wish to use.
When you receive confirmation from the SmartGrill by
Lynx™, use the voice command: “SmartGrill, Add <X>
minutes” where X is the number of minutes you wish to
cook. You can also use the app to select the time and
temperature for your timed cook.
• Recipe Cook: Select the recipe you wish to use in the app
and send it to the grill. The SmartGrill by Lynx™’s MyChef
technology will handle the lighting and all temperature
controls based on the recipe. See SmartGrill Recipe Mode
on page 23 for details.
• Meal Mode: Meal mode is a revolutionary and completely
intuitive method of setting up your entire meal from
grilled appetizers to desserts. Simply use the SmartGrill
app to set your courses, recipes per each course, and the
SmartGrill will ensure each meal item is completed at the
same time.
• Party Mode: Party mode allows you to continually cook
foods on all your SmartGrill burners, perfect for when you
are hosting a party and need a constant stream of goodies
coming off your grill!
PRE-GRILL CHECKLIST ...continued