Manual

CARE & USE/INSTALLATION
|
25
PARTY MODE
Party mode allows you to continually cook foods on all your
SmartGrill burners, perfect for when you are hosting a party
and need a constant stream of goodies coming off your grill!
To enter Party Mode:
• Select My Chef
• Select Party Mode
• Select Add Recipe to List
• Select your recipes and add as many as you would like to
the list
• Select Start Cooking
BASIC OPERATIONS ...continued
BASIC COMMANDS
Your SmartGrill by Lynx™ can be completely controlled by
using a series of pre-set voice commands. The SmartGrill
will not respond to any voice commands if it is not in Listen
Mode (see Listen Mode instructions page 23). What follows
are the most important voice commands you will need to
control your grill:
Command: “SmartGrill, shut down.”
Function: This command will cancel any current recipes,
shut down all the burners and turn the grill off.
Command: “SmartGrill, Lights”
Function: This command will turn halogen lights over the
cooking surface on or off.
Command: “SmartGrill, Update”
Function: This command will give you an audible status
report on all of the SmartGrill by Lynx™'s burners.
Command: "SmartGrill, continue cooking."
Function: Resets auto shutdown timer back to 30 minutes.
Command: "SmartGrill, Disable Shutdown."
Function: Once you use this command, you will have to use
either a voice command, the SmartGrill by Lynx™ app, or
the ON/OFF button on the front panel of the SmartGrill by
Lynx™ in order to shut the grill off.
Command: "SmartGrill, Begin Calibration"
Function: Begins a calibration routine meant to capture the
lowest gas value for each burner that can safely maintain
flame. The process also burns all burners at high for 5
minutes to burn off factory oils (on your first use) or excess
food particles after grilling. Cannot be used during a recipe.
Command: "SmartGrill, Network Status"
Function: Provides an audible notification indicating if the
grill is currently connected to the server or not.
Command: "SmartGrill, Can You Repeat That"
Function: Repeats the audible notification last spoken by
the grill.
COOKING COMMANDS
Command: "SmartGrill, Cook <recipe name>"
Function: This starts a Recipe using one of the recipes
included in the Lynx recipe database that can be seen using
the SmartGrill by Lynx™ app. The SmartGrill by Lynx™ will
make sure that burners are available for use, then ask you
how many burners you would like to use.
Command: “SmartGrill, Update <recipe name>”
Function: This command will give you an update on the
status of a specific recipe.
Command: “SmartGrill, Rotisserie <recipe name>”
Function: This starts a Recipe using single rotisserie and one
of recipes included in the Lynx recipe database that can be
seen using the SmartGrill by Lynx™ app. The SmartGrill by
Lynx™ will make sure that the rotisserie is available for use,
and then ask you for the cooking time. The rotisserie motor
must be attached and plugged in to the grill. The rotisserie
motor must be started manually.
Command: “SmartGrill, Use <1 burner, 2 burners, 3
burners>”
Function: When asked by the SmartGrill by Lynx™ which
burner to use, this command is how to answer.
Command: “SmartGrill, Same as Last Time.”
Function: When asked by the SmartGrill by Lynx™ how
much time you wish to cook for, this command will default
either to the amount of time specified in the recipe or to the
VOICE COMMANDS