Manual

CARE & USE/INSTALLATION
|
27
USING YOUR SMARTGRILL BY LYNX™ RECIPE DATABASE ...continued
USING YOUR SMARTGRILL BY LYNX™ RECIPE DATABASE
recipes at a time. Your 101st recipe will replace the least
used recipe, and will continue to cycle, allowing you to
access 100 different recipes by voice command at any time.
You can always send a new recipe to the SmartGrill, and
grill using either voice commands or the app or both to
complete the recipe.
My Recipes
The “My Recipes” tab is where you can store your own
recipes that will then be followed by the SmartGrill by
Lynx™. To create your own recipe:
• Click on the “+” sign to bring up the “New Recipe”
Screen
• Click on the “Recipe Name” field to input a name for
your recipe.
• Click on “Grill” or "Rotisserie" to choose between grilling
and using the rotisserie. Note the rotisserie motor must
be attached, plugged in, and started manually.
• Click on Food Type to choose the type of food your
recipe will use.
• Click on the “Share on Community” switch so that it
shows green if you wish to share your recipe with the Lynx
SmartGrill by Lynx™ community.
• The Ingredients and Directions tabs are text screens
where you can put down ingredients and the recipe
directions, respectively.
• Click on the “Add Step” to input the recipe’s step
name, the action you will need to take in the recipe, the
temperature for the grill and the amount of cooking time
the step will take. Click “Done” when you’ve completed
entering the step.
• Note that you may enter as many steps as you wish.
When you’ve completed entering the recipe information,
add a last step to "Remove Food". Then click on “Done”
to save it to your database.
Community
This tab contains a selection of recipes created and
uploaded in “My Recipe” by the community of SmartGrill
by Lynx™ users.
When you have selected the recipe you wish to use, click
“Cook Now”. Then:
• Choose the number of burners you wish to use on the
“Send to grill” screen.
• Click on “Send to Grill.”
• Follow the verbal and command prompts to carry out the
recipe.
SIMULTANEOUS MANUAL AND AUTOMATIC CONTROL
When beginning a Recipe Cook or Timed Cook, your
SmartGrill by Lynx™ will automatically default to using
burner number 1. This can be changed through the use
of verbal commands (See INDEX: “Voice Commands”).
During this cooking process, the other burners can be used
in manual mode by turning their corresponding dials to the
desired temperature.
DIRECT HEATING
Direct heat cooking occurs when food is placed directly
over the heat source. This form of heat is know as
"radiant" heat because the heat radiates directly from the
source to the food.
Direct heat is a must when you want to sear the outside of
your food to seal in flavor. Lynx ProSear™2 Burners provide
the heat necessary to sear foods and seal in flavor.
INDIRECT HEATING
It is possible to turn on burners 1 and 3 and place the
food over burner 2. This type of cooking is called “indirect
heating” and can only be achieved under manual control.
All recipes in Timed Cook, Recipe Cook, Meal Mode, and
Party Mode must be done via direct heating.
CANCELLATION COMMANDS
Command: “SmartGrill, Cancel <RecipeName>”
Function: This command will cancel the selected recipe.
The SmartGrill by Lynx™ will then ask if you wish to shut
down the burners or continue cooking in Manual mode.
Note that this command does not shut off the grill.
Command: "SmartGrill, Override <RecipeName>"
Function: This command will cancel the ongoing recipe
and leave the burners on for manual usage.
Command: “SmartGrill, Turn off burners.”