Manual

30
|
CARE & USE/INSTALLATION
CLEANING YOUR SMARTGRILL BY LYNX™ ...continued
TROUBLESHOOTING YOUR SMARTGRILL BY LYNX™
SMELL OF GAS WHILE COOKING
If you smell gas while the grill is operating, immediately
turn off all burners and shut off the main fuel supply.
• Perform a leak test. (See INDEX: “Leak Test procedure”
for further details)
• Check for blockages.
BEFORE YOU CALL FOR SERVICE
Please check a few things before calling for service:
• Is there fuel supplied to the grill?
• Is the main shut off valve open?
• Are you using the correct type of fuel (Liquid propane or
natural gas)
• Is your propane cylinder empty? Have you recently refilled
the propane cylinder? If so, is the connection tight?
• Have you opened the valve on the propane cylinder?
• Is the grill plugged in to a live electric circuit?
• Has the GFI outlet tripped requiring a reset?
PROBLEMS WITH WIRELESS CONNECTIVITY
First, go to the location of your grill with your iOS or
Android device. How strong is your signal at that location?
For optimum performance, you will need a 60% signal. If
not, please check with your Wi-Fi installer to boost the
strength.
Is your SmartGrill within 100 feet of your router? If not,
you may need to boost signal strength.
Do you have an N version router? The SmartGrill by
Lynx™ will perform better with an N router.
Do you have the correct operating system on your smart
device?
iPhone 5, 5C, 6, or newer, iPad version 2.0 or newer or
Android 4.4 operating system or newer
To find your operating system on your smart device:
iPhone and iPad: Go to Settings /General/ About/
Phone to find your model number
Android: Go to Settings, About Phone, Android
version
Then, make sure that your wireless network is connected
properly and is broadcasting at least a 60% signal to
reach your grill. After that, proceed through the wireless
connection sequence:
• Activate your iOs or Android device
• Click on the “Settings” app
• In Settings, click on “Wi-Fi”
• You will see “SmartGrill by Lynx™” in the selections
under “Choose a Network.”
• Tap SmartGrill by Lynx™ to connect to the SmartGrill by
Lynx™ Wi-fi spot
• Shut down the Settings app
• Activate the SmartGrill by Lynx™ app.
If this is the first time you’ve activated your SmartGrill by
Lynx™ app, you will be asked to input a PIN number and
the serial number for the Grill.
PROPER PLACEMENT OF EACH BURNER IS CRITICAL AFTER CLEANING. THE VENTURI MUST BE CENTERED
OVER THE BRASS ORIFICE, RESTING LEVEL WITHOUT ANY ROCKING, AND THE CROSS BAR MUST BE
SEATED IN THE CENTER BRACKET.
FAILURE TO MEET THESE CONDITIONS MAY CAUSE A VERY DANGEROUS CONDITION THAT CAN CAUSE
PERSONAL INJURY AND DAMAGE PROPERTY.
WARNING: BURNER PLACEMENT