Manual

CARE & USE/INSTALLATION
|
33
Check to see if the gas is turned on. Wait 5 minutes for the
gas to dissipate, then try lighting it again. Check If it still
does not light, call Lynx at 888-289-5969.
Audible: "Burner <N> turned on unexpectedly."
Text: "Burner <N> turned on unexpectedly."
Check grill to see if someone else is using the grill manually.
If not, shut down that burner and watch to see if it lights
unexpectedly again. If so, call Lynx at 888-289-5969.
Audible: "Burner <N> temperature not maintained."
Text: "Burner <N> temperature not steady."
Check area around grill for breeze or wind (see INDEX
"Grilling in Windy Conditions"; confirm your gas is on, and
if you have a propane bottle, that it has enough gas in it.
Audible: "Error encountered. Please unplug and re-plug
SmartGrill power cable."
Text: "Error encountered. Please unplug and re-plug
SmartGrill power cable."
Unplug and re-plug your power cable. Wait 20-60 seconds
to hear "SmartGrill is ready," then press the power button.
If the SmartGrill still does not function, call Lynx at 888-289-
5969.
Audible: "Ambient temperature too high."
Text: "Ambient temperature too high."
The temperature around the PC or the circuit board in the
grill head is too hot. Turn the grill off and allow it to cool.
Try the grill again after it has cooled off.
Audible: "Burner <N> knob is malfunctioning."
Text: "Burner <N> knob has malfunctioned."
Indicates that a knob is missing or not connecting to the
grill correctly. The grill will turn that burner off until the
knob is fixed. Replace any knob that has been removed or
fallen off. If the problem persists, call Lynx at 888-289-5969.
Audible: "Burner <N> gas valve is malfunctioning."
Text: "Burner <N> gas valve has malfunctioned."
Indicates gas is not flowing through the valve. Check to be
sure the gas is turned on, and there is enough gas in your
propane bottle. The grill will turn this burner off until the
valve is fixed. Call Lynx at 888-289-5969.
Audible: "Burner<N> valve short circuit."
Text: "Burner<N> gas valve has short circuited."
Shutdown the burner with the problem and call Lynx at
888-289-5969.
NETWORK TROUBLESHOOTING
If you do not have at least a 60% signal on your smart
device while standing at your grill, your grill will not perform
optimally. Here are some suggestions for improving your
network:
Position your wireless router, modem router, or access point
in a central location. The best place for a Wi-Fi router is in
the center of your home.
• The distance between your router and your SmartGrill
should not exceed 50 ft.
• Verify that there are no obstacles between your SmartGrill
and the router.
• Appliances, metal objects, cordless phones, stone walls,
fireplaces, etc. decrease Wi-Fi strength.
• Check the cable that connects the modem to the router
to make sure it is in good condition. If not, replace the
cable.
• Replace your router antenna with a Hi-Gain wireless
antenna. They boost the signal strength and aim the
signal in one direction.
• Reduce wireless interferences by using devices that
communicate via the 5.0 GHz frequency instead of the
more common 2.4 GHz frequency (same frequency as
baby monitors, garage door openers, cordless phones,
microwave ovens).
• Connect your SmartGrill to your router using a CAT 5E
or better cable and then try to setup a wired network
connection.
Add a wireless repeater
A wireless repeater is a device that extends your wireless
network's range without requiring you to add any wiring.
Place the repeater halfway between your wireless router
and your SmartGrill to get an instant boost in your wireless
strength.
Add an extended antenna
Sometimes when a SmartGrill is built-in to an island, the
antenna cannot pickup a strong enough signal to run the
SmartGrill. If this is the issue, please call Lynx to request an
antenna extension at 888-289-5969 option 5.
For additional troubleshooting of wireless connections,
contact your local Wi-Fi installation expert.
TROUBLESHOOTING ...continued