Operation Manual

33
r About
This option displays information about the Lynx Mixer, driver, and firmware as follows:
Mixer/Driver Version: Displays the current mixer
version and build number.
Build Date: Displays the date the driver and mixer were
released.
DLL and SYS versions (Windows only): These are
driver system file versions, useful for diagnosing a
potential versioning mismatch.
Device Name: Displays the name of the Lynx audio
device installed. Up to six Lynx audio devices may be
shown. In this case, E44.
Serial Number: Displays the serial number of the Lynx
Card.
Hardware Rev: Displays the hardware version of the Lynx Card.
Firmware Version: Displays the firmware revision of the Lynx Card.
Firmware Date: Displays the date the Lynx firmware was released.
PLEASE NOTE: The About Lynx Mixer window may display different information than what is shown here.
7.3.7 Settings Menu
In a typical system, the only selection here is “Always on Top”. When active, this places the
Lynx Mixer forward no matter what other applications are active in the computer. By default,
this setting is OFF.
7.3.8 Settings > Advanced Menu
The Advanced Menu within the Settings Menu provides access to
controls geared towards power users, and unique contexts of use.
q Adapter Settings
This page is for assigning the order for each card in a multi-card configuration. Current
operating systems can alter device order for a variety of reasons. This can be problematic
when a system is configured around a static device order. This page solves that by insuring
that the intended device order does not change.
For instructions on how to use this tool, see Section 8.1.2: Setting Device Order.