Operation Manual

Page 19
on Windows and OSX can be downloaded from the Lynx Studio website. Here are the steps to insure that your Hilo is
up to date and in top form:
1. Make sure that your Hilo has a valid Thunderbolt connection to the computer. It is essential that current
drivers are installed and operational.
2. Visit www.lynxstudio.com and click Support > Downloads.
3. Select your OPERATING SYSTEM from the list, “Hilo” as the PRODUCT, and “All Types” for FILE TYPE.
Click “Search”
4. Download the Hilo Firmware Updater. Double Click to launch it.
5. Follow the prompts (Windows Users need to accept the EULA) until you reach the Hilo Firmware Update
screen. Verify that the “New Firmware Version” is higher than the “Current Firmware Version”. If so, click
“Update”
6. The Hilo LCD screen will display a warning screen that reads “Do not turn off the computer or the Hilo
during the firmware updater process”. There is also a progress bar.
7. Follow the prompts. When the Update is complete, you will be instructed to power down Hilo. Turn off the
front panel standby switch. Then turn off the rear panel power switch. Wait three seconds, then power Hilo
back up.
8. Now we need to update the LT-TB card inside of Hilo. Again visit www.lynxstudio.com. Select your
OPERATING SYSTEM from the list, “Lynx LT-TB” as the PRODUCT, and “All Types” for FILE TYPE.
Click “Search”