Operation Manual

Page 30
RED buttons mean that the associated signal source or output is OFF or MUTED
GREEN buttons mean ON or UNMUTED
A WHITE LINE around a button means this is the channel is in focus, and can be acted upon
by the faders or ON/OFF switch below the fader.
As you can see, the page is divided into input sources on the left
and outputs on the right. What we are seeing here is which input
sources are assigned to the displayed output. We are not turning
inputs On and Off, we are turning the connection between an
input and output On or Off. Think of it as a patch cable.
The ON/OFF button on the Inputs side patches that input source
to the active output. On the Output side, the On/Off button mutes
or un-mutes the selected output.
With the Graphic above, we see that Hilo TBT channels 1&2 being and the Line In are both routed to the Hilo’s Line
Out.
