Operation Manual

Page 59
9 Certifications
9.1 FCC DECLARATION OF CONFORMITY
MANUFACTURERS NAME: Lynx Studio Technology, Inc.
MANUFACTURER ADDRESS: 190 McCormick Avenue
Costa Mesa, CA 92626, U.S.A.
TELEPHONE [phone]
COMPLIANCE TEST REPORT NUMBER: D11123R1
COMPLIANCE TEST REPORT DATE: January 12, 2012
TYPE OF EQUIPMENT: Professional A/D and D/A Converter
EQUIPMENT CLASS: Residential, Commercial, Light Industry, Urban Outdoors, Dedicated Studios
MODEL NUMBER: Hilo
CONFORMS TO THESE SPECIFICATIONS: CFR Title 47 FCC Part 15 Subpart B Class B per CISPR 22 Limits
TEST PROCEDURE: ANSI C63.4
YEAR OF MANUFACTURE: 2011
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation.
If the unit does cause harmful interference to radio or television reception, please refer to your user’s manual for instructions on
correcting the problem.
I the undersigned, hereby declare that the equipment specified above conforms to the above requirements.
Costa Mesa, California
January 12, 2012
Robert J. Bauman
Compliance Engineer