Operation Manual

Page 3
1.6.2 Computer requirements
Hilo is configured to operate with Mac or PC computer systems via a Thunderbolt connection. If one wishes to use this
connection, check the system requirements below to insure compatibility.
There are three essential elements that must be met for compatibility with the Hilo with Thunderbolt:
1. The host computer must have one or more compatible and functional Thunderbolt ports.
2. The host computer must meet the system requirements necessary for correct functioning of the LT-TB.
3. The Hilo must have firmware revision 6 or above.
A list of Intel approved Thunderbolt computers, motherboards and components is available online at
www.thunderbolttechnology.net > Products
It also is important to note that most professional audio applications place significant demands on your computer’s
resources, and it is therefore recommended that you meet or exceed the recommended system requirements for your
Digital Audio Workstation or audio playback software, which will likely be greater than those listed for Hilo. Please
refer to your audio software’s documentation for more information.
1.6.2.1 Windows
• Intel Core 2 @ 1.6 GHz, or AMD equivalent
• PC or laptop manufactured in or after 2013
• 1GB RAM
• One functional Thunderbolt port
• Windows 7 (32-bit or 64-bit) or Windows 8
• A connection to the Internet to download the Lynx Driver (this can be from a different computer than the one
that the Aurora/TB is connected to).
NOTE: The Hilo/TB is not supported under Windows 95, 98, ME, Windows 2000, Windows XP or Windows Vista.
Windows installed via BootCamp is not supported.
1.6.2.2 Macintosh OS X
• Any Intel Processor based Mac or MacBook computer running OS X 10.8.5 or higher
• 1GB RAM
• One functional Thunderbolt port
NOTE: Hilo’s Thunderbolt operation is not compatible with OS X 10.7 or below.