Operation Manual

Page 4

1.6.3 Compatible Firmware

If the LT-TB is being installed into the Hilo, it is critical that the Hilo have firmware revision 6 or higher. Before

installing the card, we recommend verifying the firmware version, and updating it through the USB connection to the

computer, before replacing the LT-USB card in the Hilo with the LT-TB.

To verify the firmware revision, on the Hilo front panel navigate to the Information Screen, then tap “About Hilo”. If

the Hilo firmware version is less than 6 it will need to be updated. The appropriate firmware updater can be

downloaded from the lynxstudio.com website: Support > Downloads > Product = Hilo.

After programming the Hilo with updated firmware, then install the LT-TB card per the instructions in the LT-TB

Quickstart.

1.7 Using this manual

To insure smooth sailing with your new product, we recommend reading through the entire manual before using Hilo.

Thereafter, use the manual as a reference as needed when questions arise.

The following typographic conventions are used in this manual:

• ALL UPPER CASE TEXT refers to a specific parameter selection control (i.e. SYNC SOURCE) or a cable

connection.

• Text in quotation marks indicates a parameter selection value or menu option (i.e. “EXT”).

• Phrases, such as: Start > Programs > Lynx Studio Technology use the greater than symbol (“>”) to indicate

multiple menu options or mouse selections within a software control context.

1.8 Registration

Lynx is committed to providing you with the best service possible. To help us serve you better, please be sure to