View Manual

D. Startup

Check that shipping tape(s), string and packing are removed before starting the icemaker.

1) Clean inside the storage bin and door.

2) Open the water supply line shut-o valve and plug in the icemaker.

3) Move the control switch to the "ICE" position. The freezing cycle will start automatically.

E. Preparing the Icemaker for Long Storage

Drain the icemaker to prevent damage to the water supply line at subfreezing temperatures,

using air or carbon dioxide. Shut o the icemaker until proper air temperature is resumed.

WARNING

1) Close the water supply line shut-o valve, and open the drain valve.

2) Move the control switch to the "OFF" position.

3) Blow out the water supply line and the internal water circuit.

Note: This procedure is necessary to protect the icemaker from freezing up at subfreezing temperatures.

4) Unplug the icemaker.

5) Remove all ice from the storage bin, and clean the bin.

6) Close the drain valve.

Fig. 2

Icemaker

Shut-o Valve

Drain Valve

Air or CO2