Assembly Manual
9 SEDONA by LYNX™ Ready to Finish Island Assembly Instrucons
SEDONA by LYNX™ READY TO FINISH ISLAND ASSEMBLY INSTRUCTIONS
Step 4
Assembling the Front, Rear and Side Panels of the Counter Island (Parts CF, CR, CB, CS1, CS2) - Connued
Secure the side panel (CS1) and front panel (CF) using 2 wing nuts on the bolts.
The rear panel (CR) has a notch on each
edge and also slides under the tabs on
the oor base (CB).
Once in place aach to rear panel (CR)
with 2 wing nuts on the bolts of the side
panel (CS1).
Assemble the second side panel
(CS2) to the front panel (CF) and
the back panel (CR) using 2 wing
nuts on each side.
Base panel size of the counter
island is 24 ¼ x 90
Step 5
Aaching the Grill and Counter Islands Together
Secure the grill island to the counter island with the
supplied aaching bracket (AB).
Aach the bracket (AB) to the counter island frame by
securing the medium wing bolts using 4 small hook
brackets on the interior opening.
Notch
Tab