Owners Manual

SHELVING
IMPORTANT NOTE: Interior louver openings
and fan guard openings should never be
obstructed to achieve maximum performance.
The single door unit comes standard with black
vinyl coated adjustable full extention pullout
shelves.
Adjusting Full Extention Shelving
1. Pull the shelf out to its furthest position.
Locate the tabs in the middle of both
extenders (Figure 4), Lift on tab up while
pushing the opposite tab down and pull
shelf out.
2. Repositon each bracket separately.
Grasp the middle of the bracket, pull the
front end up and out, then forward to
remove (Figure 5)
3. Place bracket at the desired postion.
Push the rear hook into the rear key
slot. Set front bracket on the wall hook
4. Repeat for other bracket(s)
5. Push extenders completely into the unit.
Align the shelf grooves with the
extenders an slide completely into the
unit.