Owners Manual

7. Remove the Lynx name plate from
the Door using a Plastic Putty Knife.
Install the new Lynx nameplate
(included)
8. Insert bearing into Top Door Hnge
Bracket
9. Insert V-Block into Bottom Door
Hinge Bracket, attach with E-Clip
10. Attach the Top and Bottom Door
Hinge and Push Plunger using screw
removed in Step 6
11. Place Lower V-Block into Lower
Cabinet Hinge with notche parallel to
cabinet
12. Lift the Door Assembly and insert
top pin into bearing. Then move door
toward cabinet and align V-Blocks
13. Insert and tighten the Lower Hinge
Pin to complete assembly
Step 8:
Step 9:
Step 10
:
Step 11