Use and Care Manual

Drawers
IMPORTANT NOTE: Interior louver openings
and fan guard openings should never be
obstructed to achieve maximum performance.
IMPORTANT NOTE:
All shelving is inter-
changeable with all products.
Drawers
Full-extension Drawers – Pull the drawer out to
its farthest point. Locate the tabs in the middle
on both sides of the extenders. Press left tab up
and dright tab down; pull shelf out.
Move each extender separately. Hold the middle
of one extender, pull the front up then move
extender ½-inch to the inside of unit. Pull up
then pull out. Place extender at desired height,
place rear standoff screw into rear pilaster, slide
back. Place front standoff screw into front
pilaster, slide down.
To return drawer, first push both extenders
completely in then line up the shelf grooves and
slide easily into the unit.
CAUTION
completely empty the drawer
before removing