Use and Care Manual

OPERATION
The Lynx L24DWR comes equipped with a state
of the art refrigeration system. The compressor
is of a variable speed variety, which
automatically changes speeds based on system
conditions and load. The cabinet is equipped
with an adjustable digital temperature controller
and LED display.
The freezer is a frost-free model meaning the
evaporator (cooling coil) automatically defrosts
on demand at predetermined intervals. The
controller also has a manual defrost soft button
on the front panel signified by a melting
snowflake. If depressed it will automatically put
the system into a defrost cycle.
Interior light
The unit is equipped with an interior light that is
illuminated when the door is opened. The
cabinet also comes standard with a manual light
switch located next to the light for displaying
your products through a glass door. Always
ensure that the manual switch is in the off
position before closing a solid wood or stainless
steel door. If manual light switch is left on for an
extended period of time it may increase the
cabinet temperature, especially at the top and
cause the refrigeration system to run longer.
Loading Product
IMPORTANT NOTE: Before storing perishables,
allow unit to run for a minimum of 24 hours to
allow temperature stabilization after start-up.
When loading items into unit, do not block
internal louvers and fan guard openings or
performance will be decreased.
Temperature Control Panel
The controller is located inside of the unit. The
display will read OFF when unit off and will show
temperature when unit is on.
IMPORTANT NOTE: the led display is reading
actual air temperature not product temperature.
Under these conditions, an air temperature
swing does not change the actual product
temperature. Product temperature remains at a
very stable temperature.
Freezer: 10°
°°
° swing
Refrigerator 6°
°°
° swing
Temperature Control Panel
The controller is located inside of the unit. The
display will read OFF when unit off and will show
temperature when unit is on.