Installa on, Care and Use of Your Lynx Beverage Tower Kits L24TWS Beverage Tower Kit Components Lynx Beverage Kits L24TWD Model L24TWS Single Tower and L24TWD Double Tower
Introduc on: Your Lynx Beverage Kits comes with all of the components necessary to install a keg tap and tray to an outdoor island or to the Lynx model L24BF or LM24BF outdoor refrigerators. The Lynx model L24BF and LM24BF outdoor refrigerators have been designed specifically to work with the Beverage Kits. The L24BF refrigerator cavity is designed to accommodate two 1/6 kegs, or all single standard keg sizes except a ½ keg or larger (not provided), the CO2 tank and required connec ons.
WARNING CO2 GAS CAN BE DANGEROUS CO2 Regulator Co2 cylinders contain high pressure gas which can be hazardous if not handled properly. Make sure you READ and UNDERSTAND the following procedures for CO2 cylinders BEFORE installa on. 1. ALWAYS connect the CO2 cylinder to a regulator. Failure to do so could result in an explosion with possible death or injury when the cylinder valve is opened. 2. NEVER connect the CO2 cylinder directly to the product container.
Beverage Tower Kit Components F A H I B G C D E A. Single or Double Keg Tower B. Low Profile Keg Coupler (D System for North American Beers) C. Regulator, Dual Gauge CO2 D. CO2 Gas Cylinder E. Spill Tray F. Insula ng Sleeve G. Gasket H. Tap Handle I. Faucet Wrench (Kit contains all hoses and fi ngs, sleeve connectors, bushing and insulator sleeves) 1 Part No. Descrip on Qty 32413 33845 Tower Assembly Single Tap, or Tower Assembly Double Tap 1 Beverage Center Deck Assembly Part No.
L24TWS Tower Kit ‐ Moun ng your kit directly to an island. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. Determine the loca on of the refrigerator in the island installa on. It should be posi oned nearly flush to the face surface of the island for easy access and alignment with the tower. For the refrigerator cavity height and depth, please refer to the cutout for your individual model (L24BF/LM24BF). Posi on the refrigerator in the island opening at the exact posi on.
Connec ng the Keg to the Beverage Tower. 1. 2. 3. 4. A ach the clear hose from the beverage tower to the barbed fi ng with the hose clamp provided. Insert the rubber washer provided into the fi ng. An elbow is included to provide addi onal space above the keg coupler. Secure the elbow to the top outlet of the keg coupler with a washer between. A ach the clear hose fi ng, with washer, to the elbow. Use a wrench to ghten the connec ons.
When not in use: We recommend that the CO2 canister be shutoff and the ball valve closed if the Beverage kit will not be used for an extended period of me. Keep the CO2 tank inside the refrigerator and all connec ons intact. The CO2 tank should be replaced or refilled when the CO2 Tank level indicator falls into the red indicator zone (below 300 PSI). Check with your beverage provider for local sources of CO2.
The best outdoor kitchen products come from: Lynx Grills, Inc. For more informa on, please call: 1‐888‐289‐5969 or visit www.lynxgrills.com Email us at service@lynxgrills.com As product improvement is an ongoing process at Lynx, we reserve the right to change specifications and design without notice. Part #33913, Rev.
