MAKE THE MOST OF YOUR CARE & USE/INSTALLATION
WARNINGS WARNING • Never use dented, rusty or damaged propane cylinders. Never store additional or empty propane cylinders in the grill cabinet or in the vicinity of this or any other appliance. Do not store propane cylinders indoors or on their sides. • Children should never be left alone or unattended in an area where a grill is located. Place your grill well away from areas where children play.
WARNINGS WARNING READ THIS MANUAL CAREFULLY and completely before using your grill to reduce the risk of: 1. 2. 3. 4. Fire Burn hazard, personal injury or property damage Ruined steaks or other unpleasant cooking experiences Unapproved installation or servicing. THIS PRODUCT IS DESIGNED FOR OUTDOOR USE ONLY. Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read this manual thoroughly before installation, use, or servicing of this product.
WARNINGS WARNING 1. Always maintain the required clearances from combustible construction as detailed. The grill is designed for outdoor use only. Never use in a garage, building, shed, breezeway or other enclosed area. This grill shall not be used under any unprotected overhead combustible construction. 2. Gas grills are not design certified for and are not to be installed in or on recreational vehicles, portable trailers, boats or any other moving installation. 3.
TABLE OF CONTENTS USE & CARE GUIDELINES Lynx Grill Models 7 HOW TO LIGHT YOUR GRILL 7 HOW TO LIGHT YOUR ROTISSERIE BURNER 7 BEFORE YOU START 8 If Shipment Arrives Damaged Important Notes 8 9 SPECIFICATIONS & INSTALLATION 10 UNPACKING & ASSEMBLY 12 GAS CONNECTIONS 14 Natural Gas 14 LP Gas 15 Gas Conversion Kits 16 ELECTRICAL CONNECTIONS 18 FINAL CHECKS 19 19 CHECKLIST BEFORE EACH USE 21 A MESSAGE TO OUR CUSTOMERS 21 IMPORTANT SAFETY PRECAUTIONS 22 GRILLING IN WINDY CONDITIONS
USE & CARE GUIDELINES This use & care manual covers the Lynx grill models listed below. Some features and options will vary based upon the model that you purchased. LYNX GRILL MODELS BUILT-IN FREESTANDING L27R-3 L27TR L27TRF L30R-3 L30TR L30TRF L36R-3 L36TR L36TRF L42R-3 L42TR L42TRF L54TR L54TRF HOW TO LIGHT YOUR GRILL 1. Before each use, refer to the checklist on page 21. 2. Make sure all burner control knobs are in the “OFF” position. 3.
BEFORE YOU START WARNING • Never install this product into a combustible enclosure without an insulated jacket. Doing so could result in fire, property damage and personal injury. • Never locate the grill under a roof or overhang, in a building, garage, shed or other such enclosed area. • Never locate the grill under unprotected combustible construction. • Installation must conform with local codes or, in the absence of local codes, with either the National Fuel Gas Code, ANSI Z223.
BEFORE YOU START ...continued BUILT-IN INSTALLATIONS The Lynx Built-In Grill is designed for easy installation into masonry enclosures. NOTE: Lynx built-in grills are intended either for installation in a built-in enclosure constructed of non-combustible materials or for an installation in a built in enclosure constructed of combustible material when installed with a Lynx insulating jacket (LIJ).
SPECIFICATIONS & INSTALLATION The guides, measurements and dimensions detailed below are designed to assist you with planning your outdoor kitchen. NOTE: Due to continuing product innovation, specifications are subject to change without notice. IMPORTANT: Please reference the Care & Use / Installation manual for details on gas plumbing requirements, electrical specifications and the proper installation of your Lynx outdoor kitchen equipment. This manual can be downloaded from the Lynx website at www.
SPECIFICATIONS & INSTALLATION OUTDOOR ICE AND REFRIGERATION MODEL A LM15REFL/R OUTDOOR REFRIGERATORS 15.00 LM24REFL/R 24.00 L15ICE/LMWINE/LM15REF B C D 34.00-35.00 26.00 34.00-35.00 26.00 33.75-34.75 ICE MACHINE 33.75-34.75 LM24REFCL/CR 24.00 34.00-35.00 26.00 33.75-34.75 LM24BFL/R 24.00 34.00-35.00 26.00 33.75-34.75 24.25 34.00-35.00 26.00 33.75-34.75 15.00 34.00-35.00 26.00 33.75-34.75 15.00 34.00-35.00 24.00 33.75-34.75 a LM24DWR LMWINE LM15ICE c b d e min. f max.
UNPACKING & ASSEMBLY The grill arrives nearly ready to use and requires only minor assembly. By carefully following the uncrating and unpacking steps, you will improve the customer’s first Lynx experience. Shipping weight on smaller units is app. 300 pounds and larger units may weigh over 500 pounds. WARNING: EXCESSIVE WEIGHT HAZARD! Use two or more people to move or install this unit. Failure to follow this instruction can result in back or other personal injuries.
UNPACKING & ASSEMBLY ...
GAS CONNECTIONS WARNING NEVER CONNECT A GAS LINE DIRECTLY TO THE GRILL. A PRESSURE REGULATOR MUST BE INSTALLED ON ALL GAS EQUIPMENT. ALL LOCAL CODES REQUIRE IT AND LYNX SUPPLIES THE CORRECT REGULATOR WITH YOUR GRILL. REMOVING OR FAILING TO INSTALL THE PRESSURE REGULATOR CAN RESULT IN FIRE AND SERIOUS PERSONAL INJURY AND WILL VOID THE WARRANTY. The grill is factory set to use either propane (LP) or natural gas (NAT). It is critical that the gas you use matches that which the grill was set up for.
GAS CONNECTIONS ...continued For freestanding units using natural gas, Lynx recommends using a mobile flex gas line. This is available at your local hardware store or from your dealer. LP GAS Grills set up for LP gas come equipped with an LP hose/ regulator assembly for connection to a standard 20 lb. LP cylinder. (Type 1). All fittings necessary to attach the assembly to the grill are included.
GAS CONNECTIONS ...continued Insert the regulator inlet into the cylinder valve and turn the black coupler clockwise until the coupler is hand tight. Do not over-tighten this connection. GAS CONVERSION KITS Gas conversion kits are available from Lynx Grills to allow the grill to operate on either Natural gas or LPG. These kits should be installed by a qualified technician or certified plumber. To disconnect the coupler, first make sure the main cylinder valve is turned off.
GAS CONNECTIONS ...continued NG AND BULK PROPANE CART INSTALLATION • Shut off the gas supply at the main valve. • Disconnect all plumbing (if already attached) from the grill and the gas supply valve. • Remove all the fittings from the grill manifold. • Connect the gas supply to the grill as shown in the diagram on this page for your gas type. Inline Regulator • Turn the gas supply on and leak test all connections. (See INDEX: “Leak Test” for further details.
ELECTRICAL CONNECTIONS WARNING: ELECTRICAL GROUNDING • Product installation must meet local electric codes or, in the absence of local codes, the latest edition of the National Electrical Code ANSI/NFPA No. 70 or the Canadian Electrical Code CGA 1.6b2005. • Use only a Ground Fault Interrupter (GFI) protected circuit with this outdoor cooking gas appliance. • IMPORTANT: When connecting your rotisserie motor, first connect the motor to the grill and then plug the grill into the outlet.
FINAL CHECKS LEAK TESTING DANGER! To prevent fire or explosion hazard, DO NOT smoke or allow any potential source of ignition (sparks, electrical arcing, etc) in the area while performing a leak test. Leak tests should be conducted outdoors only. Never conduct a leak test using fire or flame. The main ceramic burners and Trident ™ burner on your Lynx grill feature an adjustable low setting.
FINAL CHECKS ...continued Flames should be blue and stable with slight yellow tips on the ceramic burner. The bright-blue core should be about 3/8 inch high with a total flame height of about 1 1/2 inches. IMPORTANT: The flames should burn quietly (no “torch” sounds) and they should not “lift” up from the burner. If your flames do not match those indicated in the photo, ensure that the burner ports are free and clear of dirt, debris, or spider webs.
CHECKLIST BEFORE EACH USE (FOR YOUR SAFETY) • Do you smell gas? If yes, shut off everything and call the gas company or a qualified plumber to check for leaks, if not please continue. • If you are using a portable propane cylinder, is it connected and leak tested? If not, check the connection before continuing. If yes, please continue. • Are you prepared to stay with the grill during the entire cooking process? If not, gather what you need before starting the lighting process. If yes, please continue.
IMPORTANT SAFETY PRECAUTIONS PLEASE REVIEW THESE IMPORTANT SAFETY PRECAUTIONS BEFORE YOU USE YOUR GRILL. 1. NEVER LEAVE THE GRILL UNATTENDED WHILE COOKING. 2. Ensure all tie-down straps have been removed from the burners. 3. Always use caution when operating the grill in a windy area. (See INDEX: “Grilling in Windy Conditions” for further details.) 4. Avoid wearing loose-fitting garments or long sleeves while grilling. They could ignite. 5.
GRILLING IN WINDY CONDITIONS IMP OR TAN T! Outdoor grills create more heat than interior kitchen ranges. That’s how they sear and grill steaks and other foods. These high-performance burners require a constant, steady supply of fresh air to mix with the fuel. Your Lynx grill pulls air Wind hitting the back of the grill can disrupt proper exhaust. Your Lynx grill features an exclusive, patent-pending Heat Stabilizer that will deflect wind and, in most cases, prevent this situation.
USING YOUR LYNX GRILL Grilling requires high heat for searing and low, controlled heat for slow cooking. Some foods are cooked using direct heat and some using indirect heat. Thinner cuts of food are often cooked at a “HI” heat setting with the lid open. Your Lynx grill features a variety of professional-level burners and tools for meeting the wide variety of cooking challenges. We will reveal how these features work for you.
PRE-GRILL CHECKLIST ...continued BEFORE EACH USE Before any use, always make sure that: • ... you do not smell gas before you light the grill. If you do smell gas, shut everything off and have a qualified plumber check for leaks. • … the cooking area is free and clear of any combustibles, besides your food, that might ignite. • … the control knobs turn freely. • … if you are using a portable propane cylinder, it is securely connected and leak tested. (See INDEX: “Cylinder Requirements” for details.
LIGHTING YOUR GRILL ...continued COLD WEATHER WARNING: PROPANE Extremely cold temperatures may cause your Trident ™ burners to light inside the burners instead of outside. Once lit, if you hear a ‘whooshing’ sound, immediately turn the burner knobs off to extinguish the flame and then immediately re-light the burners. MANUAL LIGHTING Trident ™ Burner If a burner doesn’t light after several attempts, it can be match lit using the lighting rod stored in the drip tray.
BASIC GRILLING PRE-HEATING TYPES OF COOKING Pre-heating your grill every time you use it is extremely important. Pre-heating allows the briquettes to properly heat up, providing more even and more consistent cooking results. The main ceramic burners and the Trident ™ burner in your Lynx grill are capable of creating a range of heat intensities.
USING THE TRIDENT ™ BURNER Never place food over a Trident ™ burner before it is fully pre-heated because food particles and grease dripping onto a cold Trident ™ burner can clog the tiny ports and damage the burner. For the same reason you should minimize water spills on the Trident ™ burner and should not use water to control flare-ups. Take special care to minimize dropping any liquids on the Trident ™ burner while cleaning the cooking grids.
USING THE ROTISSERIE BURNER Rotisserie cooking provides an even delivery of heat to your foods. It has no equal. The constant rotation not only cooks foods evenly, it also self bastes. As juices rise to the surface of the food, they naturally flow around it as it rotates. And, by moving the burner out from beneath the food, you avoid scorching flare-ups. Your foods will be more evenly cooked, more tender and juicier when slow-roasted on a Lynx’s rotisserie.
USING THE ROTISSERIE BURNER ...continued Slide the pointed end of the skewer into the motor and rest the other end on the rollers on the other side of the grill. serie lighting procedure. (See INDEX: “Rotisserie Burner, Lighting” for further details.) The notched portion of the skewer must rest on the rollers for proper operation. Once lit, the rotisserie burner should reach cooking temperatures in about 1 minute. It will glow evenly across its surface in about 5 minutes.
CLEANING YOUR LYNX GRILL (Including Required Maintenance) STAINLESS STEEL Lynx products are known for their attractive appearance. We achieve this by selecting only the finest grades of stainless steel and applying exacting workmanship. In order to maintain this attractive appearance over the life of the grill it is important to take the following steps: • After each use wipe down the exterior of the grill to remove grease and splatters.
CLEANING YOUR LYNX GRILL (Including Required Maintenance)...continued To Remove Ceramic Burners: WARNING DO NOT ALLOW EXCESS GREASE OR LIQUIDS TO ACCUMULATE IN THE DRIP TRAY AS THIS MAY CREATE A FIRE HAZARD. NEVER USE GRILL WITHOUT DRIP TRAY PROPERLY INSTALLED. Remove the grill racks and briquette trays. Rremove the burner caps to prevent accidental breakage Lift the burner up until the legs exit the frame. Then pull to the rear of the grill so the burner head comes off the brass orifice at the front.
CLEANING YOUR LYNX GRILL (Including Required Maintenance)...continued TRIDENT ™ BURNER It’s easy to keep your Trident ™ burner operating at peak performance. Just run it on “HI” with the hood open for 5 minutes after each use to burn away any food particles or drippings. Heat Shield Removed, Orifice/Venturi Position Any ash accumulation on the burner screen can be removed with a light brush or vacuum … BUT WAIT UNTIL THE BURNER IS COOL! Never use water or liquid to clean.
POTENTIAL PROBLEMS GRILL WON’T LIGHT First, confirm that the grill is getting electricity by turning on the lights, then: Check The Igniters Your Lynx grill uses an electric ignition system that does not spark. Instead, the igniters should glow constantly when a control knob is pushed in. • Ensure that all burner controls are set to OFF. If match lighting doesn’t work, re-check fuel connections for leaks and ensure the supply is of the correct type and is of adequate pressure.
POTENTIAL PROBLEMS ...continued REPLACE any damaged supply lines. • Check the Regulator Make sure that the regulator & hose assembly is the one designed for and supplied with your Lynx grill and that it is correctly set up for the type of fuel you are using. (See INDEX: “Regulator Conversion” for further details.) The hose and regulator provided by Lynx must be used if your grill is set-up for a portable LP Gas Cylinder. Ensure the LP hose is not behind the firebox.
POTENTIAL PROBLEMS ...continued BURNER GOES OUT • Location First determine if the problem is being caused by location. If the grill is subject to high winds, reposition it to provide some protection. • Check the Flame Check the gas supply and flame characteristics. (See INDEX: “Flame, Correct Size”) • Burners Seated Check to ensure that the burners are correctly positioned in the grill. (See INDEX: “Burner Placement” for further details.
CONTACTING LYNX CUSTOMER CARE Before calling Lynx Customer Care, please make sure you have the following information: • Model number Your satisfaction is of the utmost importance to us.
LYNX LIMITED WARRANTY * I. Limited Lifetime Warranty The stainless steel grill body, ceramic grill burners, cooking grates,Trident ™ burner and rotisserie infrared burner are warranted to be free from defects in material and workmanship when subjected to normal domestic use and maintenance for the lifetime of the original purchaser. This warranty excludes surface corrosion, scratches, and discoloration which may occur during normal use.
LYNX COMMON AREA LIMITED WARRANTY * The Lynx Limited Warranty covers residential installations only and is non-transferable to any other party. This warranty applies when the product is installed in common areas where more than a single party has rightful access to its use or in locations considered beyond normal residential use such as B&B’s, and private clubs. special or contingent damages resulting from its breach of this written warranty or any implied warranty.
WIRING SCHEMATICS L27 & L30 ROTISSERIE GRILL 40 | CARE & USE/INSTALLATION
WIRING SCHEMATICS L36 & L42 ROTISSERIE GRILL CARE & USE/INSTALLATION | 41
WIRING SCHEMATICS L54 ROTISSERIE GRILL 42 | CARE & USE/INSTALLATION
LYNX PROFESSIONAL GRILLS EXPLODED PARTS VIEW PROFESSIONAL SERIES MODEL SERIES 'R' 62 SPIT FORK 2 SPIT ROD 61 74 HEAVY DUTY, 3-SPEED MOTOR ASS'Y 75 MOTOR MOUNTING BRACKET KIT (2-POSITION) 76 3 1 FRONT HOOD ASSY 77 NUT 67 ROTISERIE JACK + 51 INTERNAL HARNESS TRANSFORMER 28 MOUNTING BRACKET F/S SCREW 66 HOOD THERMOMETER 59 B/I SCREW 70 53 TRANSFORMER HOOD BUMPER 72 LEFT HOOD 22B STOP 71 END CAP FOR HOOD HANDLE 58 NUT 67 INSULATING BUSHING 57 65 HOOD LIGHT 12 ASS'Y 56 EXTENSION SPRING HOOD
LYNX PROFESSIONAL GRILLS PARTS LIST PROFESSIONAL SERIES PARTS LIST MODEL SERIES 'R' ITEM GRILL SIZE PART NO.
MODEL-SPECIFIC BTU OUTPUTS & MAX.
INSULATED JACKET INSTALLATION INSTRUCTIONS IMPORTANT: Before you build the frame, you must take into consideration the total weight of the liner, grill and any finishing materials. Refer to the table below for the proper framing dimensions for the insulation jacket. Determine the entry point for both the gas inlet and electricl connections. Make the 4” square holes for gas and electrical connections (rear or bottom access) based on your requrements.
INDEX B Before Each Use............................................................ 25 Before You Start .............................................................. 8 BTU Outputs, Model Specific ....................................... 45 Burner Adjustment, Low................................................ 19 Burner Adjustment, Main.............................................. 19 Burner Appearance....................................................... 20 Burner Placement ................................
The best outdoor kitchen products come from: Lynx Grills, Inc. 7300 Flores Street Downey, CA 90242 Service: (888)-289-5969 Fax: (562) 299-6978 www.lynxgrills.