Asado Cooktop Care & Use Manual (L30AG / L30AGF)

16 | Use&Care / Installation
FINAL CHECKS
DANGER
To prevent fi re or explosion hazard, DO NOT smoke
or allow any potential source of ignition (sparks,
electrical arcing, etc) in the area while performing a
leak test. Leak tests should be conducted outdoors
only. Never conduct a leak test using fi re or fl ame.
• Create a soapy solution of 1 part soap and 3 parts
water.
• Confi rm that all control knobs are in the o position.
• Turn on the fuel supply. For natural gas, turn the valve
handle 1/ 4 turn to align with the gas fl ow.
• For L.P., turn the cylinder valve knob counter
clockwise one full rotation.
• Apply the soap solution generously by paint brush or
squirt bottle on all connections and fi ttings.
• If bubbles appear to "grow" on any of the
connections, you have a gas leak. IMMEDIATELY turn
o the gas supply.
LEAK TEST PROCEDURE
• Shuto the gas supply
• Turn all grill controls to the "ON" position to purge
the grill of any gas build-up, then turn the controls
back "OFF".
• Wash o the soapy solution with cold water and dry.
• Tighten the loose joint, or replace the faulty part with
manu factu rer-recommended replacement parts.
• DO NOT attempt to repair the L.P. cylinder valve if it
• is damaged. The only way to safely resolve a
damaged cylinder is to REPLACE IT.
• Repeat the leak test to ensure that no leaks are
present.
FIXING A GAS LEAK
NOTE: The Trident TM does not have an air shutter.
The appearance of the Trident TM burner should be visually
checked. The ceramic tiles should be uniformly red to
orange in appearance. There should be no lifting, fl uttering
or lazy blue fl ames.
IMPORTANT:
Make sure the owner knows where the main gas supply
shut o valve is located.
Before leaving, check all the burners for proper operation.
Make sure the control knobs turn freely and completely
through their full range.
Finally, for safety and for proper use & care, you must leave
this manual with the owner. Make sure you advise them to
keep it for future reference.
For technical assistance call:
Lynx Customer Care
888-289-5969