Owner's Manual

16
|
ALL-SEAR CARE & USE/INSTALLATION
Slide the pointed end of the skewer into the motor and rest
the other end on the rollers on the other side of the grill.
The notched portion of the skewer must rest on the rollers
for proper operation.
The Rotisserie Burner
To light the rotisserie infrared burner, first mount the skew-
ered food item on the grill then follow the rotisserie lighting
procedure. (See INDEX: “Lighting Rotisserie Burner” for
further details.)
Once lit, the rotisserie burner should reach cooking tem-
peratures in about 1 minute. It will glow evenly across its
surface in about 5 minutes.
NOTE: The grill thermometer should not be used for rotis-
serie cooking. It is not designed to read direct infrared
heat.
If the burner will not stay lit when you release the control
knob, re-light it and hold the control knob in for at least 60
seconds to allow the thermocouple to heat up.
If, after holding the control knob in for at least 60 seconds,
the burner still will not stay lit when releasing the control
knob, call for service.
(See INDEX: “Obtaining service from Lynx” for further
details.)
Must rest
on rollers