MAKE THE MOST OF YOUR L30WD-1 (pictured) L42CC-1 Warming Drawer/Warming Drawer Cabinet CARE & USE/INSTALLATION LCS30 COCKTAIL STATION CARE & USE/INSTALLATION | 1
IMPORTANT SAFETY INSTRUCTIONS WARNING: Read this manual carefully and completely before using your warming drawer to reduce the risk of: • Fire • Burn hazard, personal injury or property damage • Unapproved installation or service This product is designed for indoor or outdoor installation. Improper installation, adjustment, alteration, service or maintenance can cause personal or property damage and may void the warranty. Read this manual thoroughly before installation, use or service.
ELECTRICAL INFORMATION WARNING: ELECTRICAL GROUNDING 1. Warming drawer must be installed in accordance with the local electric code or, in the absence of local codes, the latest edition of the National Electrical Code ANSI/NFPA No. 70, or the Canadian Electrical Code CGA 1.6b 2005. 2. Use only a Ground Fault Interrupter (GFI) protected circuit with this outdoor appliance. This type of outlet should be installed by a qualified electrician. 3.
INSTALLING THE WARMING DRAWER L30WD Support Beams WARMING DR AWERS (cutout) MODEL L30WD-1 W (Width) H (Height) D (Depth) 28.50 10.00 20.50 W D 20 H Apply weather proof sealant along the edges of the warming drawer. 1/4 ” 11 1/2” 30” 120 V Electric Outlet Needed TYPICAL ISLAND INSTALLATION (L30WD) 1. 2. 3. 4. 5. 6. 7. 8. 9. Provide a 10” x 28 ½” cutout to the front of the island. Provide support beams using metal studs.
INSTALLING THE WARMING DRAWER L42CC WARMING DR AWERS (cutout) MODEL L42CC-14 24 W (Width) 0.25 H (Height) D (Depth) 19.382 4.50 3/4 ” 21” D H W 41 ” 3/4 120 V Electric Outlet Needed TYPICAL ISLAND INSTALLATION (L42CC) 1. 2. 3. 4. 5. 6. 7. 8. 9. Provide a 19 3/8” x 40 ¼” cutout to the front of the island. Provide support beams using metal studs. Pull the drawer out of the drawer casing to gain access on the mounting holder at the front of the casing.
TEMPERATURE CONTROLS The temperature control dial is used to select the temperature of the warming drawer. The warming drawer should only be opened when adding or removing food. Continuous opening of the drawer allows warm air to escape and make the food colder. Do not use aluminum foil to line the drawer. It is an excellent heat insulator and will trap heat beneath it. This may affect the performance of the warming drawer and the interior finish.
CLEANING AND MAINTENANCE The Warming Drawer is made of welded #304 stainless steel. It is non-rusting and non-magnetic. 1. 2. 3. 4. 5. Allow the warming drawer and its accessories to cool before cleaning. Remove steam pans and all accessories from the warming drawer. Unplug the warming drawer prior to cleaning. Clean all items including the drawer with a mild cleanser. Scrub dirt with a sponge. When cleaning the front panel, always scrub in the direction of the grain.
CONTACTING LYNX CUSTOMER CARE Before calling Lynx Customer Care, please make sure you have the following information: For warranty service, contact the Lynx Customer Care Department for an authorized service agent near you at: • Model number (888) 289-5969 www.lynxgrills.com • Date of purchase Your satisfaction is of the utmost importance to us.
WARMING DRAWER CARE STAINLESS STEEL Lynx products are known for their attractive appearance. We achieve this by selecting only the finest grades of stainless steel and applying exacting workmanship. In order to maintain this attractive appearance over the life of the grill it is important to take the following steps: • Use a commercially available Stainless Steel cleaner* to clean and polish the exterior surfaces. Doing these things on a regular basis minimizes the amount of effort required.
THE L30WD COMPONENTS Diagram and Parts 13 12 11 10 9 8 7 Moisture Vent Control 1 Item Description 2 3 5 4 Part Number Item 6 Description Part Number 1 Heating Element 32624 8 Handle Bracket 31736 2 Thermostat 33483 9 Drawer Assembly 80826 3 Bezel 10001 10 Steam Pan Guide 32603 4 Control Knob 31419 11 Steam Pan 32640 5 Heat on Light 32630 12 Steam Rack 31967 6 Roller Guides 32217 13 Steam Pan Lid 32633 7 Drawer Handle 32634 14 Power Cord (not Pictured)
THE L42CC COMPONENTS Diagram and Parts 13 12 11 10 4 9 5 8 7 1 2 3 6 15 16 14 Item 12 Description Part Number Item Description Part Number 1 Heating Element 32624 9 Drawer Assembly 80826 2 Thermostat 33483 10 Steam Pan Guide 32603 3 Heat on Light 10001 11 Steam Pan 32640 4 Control Knob 31419 12 Steam Rack 31967 5 Bezel 32630 13 Steam Pan Lid 32633 6 Roller Guides 32217 14 Power Cord (not Pictured) 32623 7 Drawer Handle 32634 15 Tank Drawer 80164 8
SCHEMATICS L30WD/L42CC WARMING DRAWER CARE & USE/INSTALLATION | 13
L30WD PRODUCT DIMENSIONS 14 | L30WD/L42CC WARMING DRAWER CARE & USE/INSTALLATION
L30WD CUT OUT DIMENSIONS (IN BLUE) L30WD/L42CC WARMING DRAWER CARE & USE/INSTALLATION | 15
L42CC PRODUCT DIMENSIONS 16 | L30WD/L42CC WARMING DRAWER CARE & USE/INSTALLATION
L42CC CUT OUT DIMENSIONS (IN BLUE) L30WD/L42CC WARMING DRAWER CARE & USE/INSTALLATION | 17
LYNX LIMITED WARRANTY I. Limited Lifetime Warranty The stainless steel housing is warranted to be free from defects in material and workmanship when subjected to normal domestic use and maintenance for the lifetime of the original purchaser. This warranty excludes surface corrosion, scratches, and discoloration which may occur during normal use. This warranty is limited to the replacement of the defective parts, with the owner paying a processing fee and all other costs including labor.
LYNX COMMON AREA LIMITED WARRANTY The Lynx Limited Warranty covers residential installations only and is non-transferable to any other party. This ‘non-residential’ warranty applies when the product is installed in common areas where more than a single party has rightful access to its use or in locations considered beyond normal residential use such as B&B’s, and private clubs.
The best outdoor kitchen products come from: Lynx Grills, Inc. 7300 Flores Street Downey, CA 90242 Service: (888)-289-5969 Fax: (562) 299-6789 www.lynxgrills.com P/N 31949 Rev.
