Owner's Manual

ALL-SEAR CARE & USE/INSTALLATION

MANUAL LIGHTING

If a burner doesn’t light after several attempts, it can be

match lit using the lighting rod stored in the drip tray.

First, make sure you’ve returned all of the control knobs

to the OFF position and have allowed 5 minutes for any

accumulated gas to dissipate before attempting to match

light a burner.

ProSear™ 2 Burners

To match-light the burners, use the lighting rod to insert a

lit match through the cooking grate.

Push and turn the corresponding burner control knob to

“LITE”. If the burner doesn’t light within 5 seconds turn the

knob off and wait 5 minutes before attempting to light it

again.

Lighting YOUR gRiLL ...continued

Extremely cold temperatures may cause your

ProSear™ 2 burners to light inside the burners in-

stead of outside. Once lit, if you hear a ‘whoosh-

ing’ sound, immediately turn the burner knobs

off to extinguish the ﬂame and then immediately

re-light the burners.

COLD WEATHER WARNING:

PROPANE