Electrical Adapter Kit Installation Instructions

LAK Installation Instructions

Lynx Electrical Adapter Kit

Introduction:

These instructions `detail the electrical connections between Series L and later Lynx Grills and Accessories to

older grills for the following accessories:

LSB1 Single Side Burner

LSB2 Double Side Burner

LPB Power Burner

LSB2PC Prep Center

LSBGE Grill Extender

Each kit contains two wire assemblies and a transformer. Only one wire assembly will be used depending on

the units being installed. Only the conversion for the Grills before Series L requires the transformer.

Identifying the model year .

All gas burning grills and accessories have a unique serial number to identify each product.

The serial number contains two numbers followed by two letters followed by 5 or more additional numbers.

Older Model year Newer Model year

S/N: 96KL91016 S/N: 03LN91016

LAK Installation – Series L and later Grills to a prior model Series Accessory:

1. Disconnect the transformer lead From the Grill.

2. Attach the adapter wire assembly to the transformer and grill shown as (A) and (B) in the diagram.

Locate the receptacle on the back right side of the accessory that has two simple leads. Make the

Lynx Grills, Inc. | 6023 E. Bandini Blvd. Commerce, CA 90040 | Phone: (323)838‐1770 Fax: (323)838‐1778 | www.lynxgrills.com

PN: 33194 Rev C 05/02/11

Series L+

Lynx Grill

Series J-K

Lynx Accessory

Locate the receptacle on the back right side of the accessory that has two simple leads. Make the

connection to the plug shown as (C) in the diagram. DO NOT confuse this with the receptacle shown as

“X” in the diagram. The connector with 4 wire leads will not be used.

4. The last connection is the receptacle on the adapter to the 2 pin plug on the wire lead from the

accessory.

PAGE 1
LAK Installation Instructions Lynx Electrical Adapter Kit Introduction: These instructions `detail the electrical connections between Series L and later Lynx Grills and Accessories to older grills for the following accessories: LSB1 LSB2 Single Side Burner Double Side Burner LPB LSB2PC Power Burner Prep Center LSBGE Grill Extender Each kit contains two wire assemblies and a transformer. Only one wire assembly will be used depending on the units being installed.
PAGE 2
Precautions while working on electrical connections: Read and understand the instruction manuals provided with both the grill and accessory being installed. Review these instructions in their entirety before beginning. TURN OFF ALL GAS AT IT’S SOURCE to the appliances BEFORE beginning any electrical work. When working on an island installation, open any doors or drawers and allow the space to ventilate before beginning any work. Unplug the transformer from it’s receptacle under the island.