Care and Use And Installation Guide

18
CARE AND USE/INSTALLATION
CARE AND CLEANING
!
CAUTION
SHOCK HAZARD: Disconnect electrical power from the
appliance before cleaning with soap and water.
Figure 41
This is an optional item (part number 42242373) Kit in-
cludes everything to quickly clean tap. Includes cleaning
solution, pump, mixing bottle, brush and wrench.
Front Grille
Cabinet
Interior
Care of Appliance
In the Event of a Power Failure
Cleaning the beer line
Tap Cleaning Kit
The stainless steel cabinet can be washed with either a
mild soap and water and thoroughly rinsed with clear water.
NEVER use abrasive scouring cleaners. Dry thoroughly
with a terry towel.
Wash interior compartment with mild soap and water. Do
NOT use an abrasive cleaner, solvent, polish cleaner or
undiluted detergent.
Avoid leaning on the door, you may bend the door hinges
or tip the appliance.
1. Exercise caution when sweeping, vacuuming or mop-
ping near the front of the appliance. Damage to the
grille can occur.
2. Periodically clean the interior of the appliance as
needed.
If a power failure occurs, try to correct it as soon as pos-
sible. Minimize the number of door openings while the
power is off so as not to adversely affect the appliance's
temperature.
Be sure that nothing obstructs the required air ow open-
ings in front of the cabinet. At least once or twice a year,
brush or vacuum lint and dirt from the front grille area (see
page 4).
(using tap cleaning kit 42242373):
With the faucet removed from the tower (see page 17) and
the keg coupler removed from the keg (see page 17), place
the end of the beer line in a pail or pan. Secure the pump
to the tower with the coupler nut provided on the pump
assembly. Pump a sanitizer / cleaner through the beer line
until clean. Rinse the pump bottle with hot water, and using
the pump, ush the beer line 2 or 3 times with clean hot
water.
Pail or pan
beer line
Pump connected
to tower