Operation Manual

7 External Connections
The photo below details LT-ADAT connectors.
The LT-ADAT provides two ADAT optical inputs and outputs. They are labeled on the mounting bracket and in the
figure above. The ADAT channels corresponding to each port are as follows:
IN 1 ADAT input channels 1-8
OUT 1 ADAT output channels 1-8
IN 2 ADAT input channels 9-16
OUT 2 ADAT output channels 9-16
Connect the LT-ADAT to ADAT devices in your system using standard ADAT compatible (Toslink) fiber optic
cables. Refer to the “Optional Equipment” section at the beginning of this manual for part numbers of cables
available from Lynx.
.
Page 5