Operation Manual

Page 26
10 Updating the firmware on the LT-MADI
Updating the firmware on the LT-MADI uses the same process as updating the firmware on the
Aurora. With the most current Aurora Firmware Update program, a properly installed LT-MADI
can be selected as the device to program.
Instructions for downloading and running the Aurora Update program for Windows or OSX are
available at: www.lynxstudio.com
> Support > Downloads > Product = Aurora.
At the Aurora Firmware Update screen, simply select the LT-MADI from the “Select Unit to
Update” pulldown menu, and click “Update” to run. If the LT-MADI does not appear as an
option here, verify that the LT-MADI is properly installed and the Current Aurora firmware
revision is 24 or higher.
When the update process is complete, it is important to press the front-panel Power button to
shut down the Aurora AND then
disconnect the Aurora from its power source.