Lynxmotion MINI VTAIL FRAME ASSEMBLY GUIDE MINI VTAIL FRAME ASSEMBLY GUIDE Revision 1.
Lynxmotion MINI VTAIL FRAME ASSEMBLY GUIDE Mini VTail Thank you for purchasing a Lynxmotion Mini VTail multirotor kit. This guide will help you assemble the mechanical frame. Should any parts be missing or broken, please contact us via the RobotShop Support Center or .
Lynxmotion MINI VTAIL FRAME ASSEMBLY GUIDE Rear Motor Mount SubAssembly (Build 2x) ● 1x Mini VTail Bottom Tail Motor Mount ● 3x 440 x 0.
Lynxmotion MINI VTAIL FRAME ASSEMBLY GUIDE Foam Arm SubAssembly (Build 2x) ● 1x Mini VTail Rear Arm ● 2x 1.25” x 0.25” Foam w/ Adhesive back (remove backing) Repeat this step for the other rear arm plate.
Lynxmotion MINI VTAIL FRAME ASSEMBLY GUIDE Rear ‘V’ Tail SubAssembly ● 2x Rear Motor Mount SubAssemblies ● 2x Mini VTail Top Tail Motor Mounts ● 6x 440 x 3/16” Steel Socket Head Screws
Lynxmotion MINI VTAIL FRAME ASSEMBLY GUIDE Repeat for other side
Lynxmotion MINI VTAIL FRAME ASSEMBLY GUIDE Electronics Mount SubAssembly ● 1x Mini VTail Middle Body Plate ● 4x 440 x 0.
Lynxmotion MINI VTAIL FRAME ASSEMBLY GUIDE (Optional) Flight Controller Mounting At this point, we suggest that you install the flight controller. Note that for the FLIP MultiWii, the USB port faces the FRONT of the VTail. You will find more details / explanation in the electronics assembly guide.
Lynxmotion MINI VTAIL FRAME ASSEMBLY GUIDE Base ● ● ● ● ● 2x Mini VTail Bottom Front Arm 1x Mini VTail Bottom Body Plate 1x Foam Rear Arm SubAssembly 6x 440 x 3/16” Steel Socket Head Screws 6x 440 x 0.
Lynxmotion MINI VTAIL FRAME ASSEMBLY GUIDE Standoffs ● 10x 440 x 3/16” Steel Socket Head Screws ● 10x 440 x 0.
Lynxmotion MINI VTAIL FRAME ASSEMBLY GUIDE Front Arms ● 2x Mini VTail Top Front Arm ● 2x Mini VTail Landing ● 6x 440 x 3/16” Steel Socket Head Screws
Lynxmotion MINI VTAIL FRAME ASSEMBLY GUIDE Rear Arm, V Tail & Landing ● Rear V Tail SubAssembly ● 1x Mini VTail Landing ● 4x 440 x 3/16” Steel Socket Head Screws Note: The foam compresses the tail to prevent it from moving (The foam will not be shown again in the assemblies below for clarity)
Lynxmotion MINI VTAIL FRAME ASSEMBLY GUIDE Middle Plate (Option 1) ● 1x Mini VTail Middle Body Plate (with or without electronics) ● 6x 440 x 3/16” Steel Socket Head Screws
Lynxmotion MINI VTAIL FRAME ASSEMBLY GUIDE Top Body Plate (Option 2) ● 1x Mini VTail Middle Body Plate ● 6x 440 x 3/16” Steel Socket Head Screws Note: Electronics mounting not shown for clarity
Lynxmotion MINI VTAIL FRAME ASSEMBLY GUIDE Top Body Plate Standoffs ● 6x 440 x 1” Aluminum Hex Standoffs
Lynxmotion MINI VTAIL FRAME ASSEMBLY GUIDE Top Body Plate ● 1x Mini VTail Top Body Plate ● 6x 440 x 3/16” Steel Socket Head Screws Proceed to the Electronics Assembly Guide