Assembly Manual

ManualsBrandsLynxmotion ManualsVTail 500Lynxmotion Hunter VTail 500 Drone (T-Motor Combo Kit)

LynxmotionV-Tail

VTail400/500FRAMEASSEMBLYGUIDE

Revision1.0March27,2013

Revision1.1November29,2013

Summary of content (13 pages)

PAGE 1
Lynxmotion V-Tail VTail 400/500 FRAME ASSEMBLY GUIDE VTail 400/500 FRAME ASSEMBLY GUIDE Revision 1.0 March 27, 2013 Revision 1.
PAGE 2
Lynxmotion V-Tail VTail 400/500 FRAME ASSEMBLY GUIDE VTail 400 / 500 Thank you for purchasing a VTail multirotor kit. This guide will help you assemble the mechanical frame. Should any parts be missing or broken, please contact us via the RobotShop Support Center. Images shown are for the VTail 400 though VTail 500 parts are designed the same way. Special thanks to InnerbreedFX.
PAGE 3
Lynxmotion V-Tail VTail 400/500 FRAME ASSEMBLY GUIDE Landing Gear (Build 3x) ● ● ● ● 4x 440 x 3/8" hex screws 4x 440 nylon lock nuts 2x 440 x 1/4" hex screws 1x 440 hex standoff
PAGE 4
Lynxmotion V-Tail VTail 400/500 FRAME ASSEMBLY GUIDE Front Arms (Build 2x) ● 8x 440 x 1/4" hex screws ● 4x 440 x 0.
PAGE 5
Lynxmotion V-Tail VTail 400/500 FRAME ASSEMBLY GUIDE Note: The 0.5" standoff in the landing gear is designed to pull the two tips closer together, you may want to remove one of the 440 hex screws from the 0.5" standoff at the base of the landing gear to make installation into the frame easier.
PAGE 6
Lynxmotion V-Tail VTail 400/500 FRAME ASSEMBLY GUIDE Rear Arm (Build 2x) ● 4x 440 x 1/4" hex screws ● 4x 440 x 0.
PAGE 7
Lynxmotion V-Tail VTail 400/500 FRAME ASSEMBLY GUIDE Rear Tail ● ● ● ● 8x 440 x 1/4" hex screws 2x 440 x 3/8" hex screws 2x 440 lock nuts 2x Rear Arm Assemblies
PAGE 8
Lynxmotion V-Tail VTail 400/500 FRAME ASSEMBLY GUIDE
PAGE 9
Lynxmotion V-Tail VTail 400/500 FRAME ASSEMBLY GUIDE Rear Arm (Build 1x) ● ● ● ● 12x 440 x 1/4" hex screws 6x 440 x 0.
PAGE 10
Lynxmotion V-Tail VTail 400/500 FRAME ASSEMBLY GUIDE Note: The 0.5" standoff in the landing gear is designed to pull the two tips closer together, you may want to remove one of the 1/4" 440 hex screws from the 0.5" standoff to make installation into the frame easier.
PAGE 11
Lynxmotion V-Tail VTail 400/500 FRAME ASSEMBLY GUIDE
PAGE 12
Lynxmotion V-Tail VTail 400/500 FRAME ASSEMBLY GUIDE Main Body ● 12x 440 x 1/4" hex screws ● 6x 440 x 1.5” hex standoffs ● 6x 440 x 1.
PAGE 13
Lynxmotion V-Tail VTail 400/500 FRAME ASSEMBLY GUIDE