Quick Start Guide


LynxmotionUAV
QuadrinoNanoQuickStart


Electronic Speed Controller (ESC) Wiring:
EachoftheESCsneedtobeconnectedtotheQuadrinoNano.OneoftheESCswillpowertheflight
controllerwithitsinternalvoltageregulator(BEC),whichiswhyonlyoneoftheESCs’connectorshasall
threewires(GND/+5V/Signal)andtheotheronesonlyhavethesignalwire.Usethefollowing“MultiWii
Types”toknowwheretoconnecteachofyourESC’s.

Note:Cables7,8,9and10arenotinsertedinthewiringharnessbecausemostpeopleuseaQuadcopter
configuration.SimplyinsertmoreasneededintotheconnectorforHexacopterorOctocoptermultirotors.

Quadrinomotorwiringharness

LynxmotionUAV
P.3

